How To Remove, Re-Install Or Replace Serpentine Belt | Honda Insight Gen II 2009-2014 Hybrid IMA DIY
4.8 هزار بار بازدید -
3 سال پیش
-
In this video, young DIY
In this video, young DIY mechanic Aiman will show you how to remove, re-install or replace the serpentine drive belt on a Gen II Honda Insight. Second Generation Insight Hybrid IMA Integrated Motor Assist cover model years 2009 2010 2011 2012 2013 2014. Here are the #ad links to some of the tools or parts which might be required to perform this repair:
1. https://amzn.to/3DTrNcd | Belt Tensioner Compatible with Honda Insight 2010-2013 CR-Z 2011-2014
2. https://amzn.to/3EWD3pW | A-Premium Accessory Drive Belt Tensioner Assembly Replacement for Honda CR-Z 2011-2014 Insight 2010-2013
3. https://amzn.to/31UPDYd | Powerbuilt Alltrade 648629 Kit 52 Serpentine Belt Tool Set
4. https://amzn.to/3oK6Zjb | ACDelco Specialty K081264HD Heavy Duty V-Ribbed Serpentine Belt
5. https://amzn.to/3DPCxIA | Serpentine Belt Wrench Tool Equipment Hand Tool Removing Installing Tool Serp Belt Wrench for Acura Accord CR-V Civic
Or Click on Amazon link here and search for what you need: https://amzn.to/3xIOsqg
Changing the belt is an easy task and requires no special tools. You'll need to remove the covers under the engine to get access from below. While you're at it, replace the idler pully as well. The bearings eventually go on these and they're not expensive. The diagram as well as pictures of the pulleys - idler tensioner, AC compressor, crankshaft & power steering pump are shown in the video. There is no alternator pulley for IMA Insight.
Steps:
1. Open the hood/bonnet.
2. Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
3. Lift the car using a jack or place it over an inspection pit.
4. Undo the fasteners of the oil pan lower cover. Use a Phillips screwdriver. Use a clip removal
tool.
5. Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
6. Remove the wheel arch cover.
7. Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
8. Remove the V-ribbed belt.
9. Return the tensioner pulley to its initial position.
10. Install the V-ribbed belt.
11. Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
12. Place the V-ribbed belt on the tensioner pulley.
13. Return the tensioner pulley to its initial position. Use a combination spanner #14.
14. Run the engine for a few minutes. This is necessary in order to make sure that the component
operates properly.
15. Shut off the engine.
16. Install the wheel arch cover to its mounting seat.
17. Install and tighten the wheel arch cover fasteners.
18. Tighten the fasteners of the oil pan lower cover. Use a Phillips screwdriver.
19. Lower the car.
20. Remove the fender protection cover.
21. Close the hood.
Source (Credits): https://club.autodoc.co.uk/pdf-manual...
This procedure can be used for:
HONDA INSIGHT HYBRID 1.3 (ZE_, ZE2, ZE28, ZE2) & HONDA JAZZ III (GE_, GG_, GP_, ZA_, GP1)
Honda Insight:
The Honda Insight is a hybrid electric vehicle that was manufactured and marketed by Honda in its first generation as a two-door, two passenger liftback (1999–2006) and in its second generation as a four-door, five passenger liftback (2009–2014). In its third generation, it became a four-door sedan (2019–present). It was Honda's first model with Integrated Motor Assist system and the most fuel efficient gasoline-powered car available in the U.S. without plug-in capability. EPA estimates for the first-generation Insight were 61 City/70 Highway/65 Combined.
Second generation (ZE2/ZE3; 2010–2014):
The new Insight includes Honda's fifth generation of its Integrated Motor Assist (IMA) hybrid system. This system mates an internal combustion engine with an electric motor mounted directly to the engine's crankshaft between the engine and transmission.
Thanks for watching, please check our other DIY auto repair tutorial & guide videos on EyeOnAiman's channel. Other cars Aiman have worked on includes Honda Accord, Civic, Insight, CR-V, Hyundai Santa Fe, Elantra and Toyota Prius Hybrid.
Obviously, Aiman's auto repair videos are mostly designed for entertainment purposes. Aiman is not a professional and not a certified ASE mechanic. The videos should always be used only as a guide.
You can watch all of Aiman's auto repair videos in the following playlist: How To Remove Alternator Hyundai Sona...
This video is presented to you by Aiman-Imran Anuar. You can watch more of #Aiman_DIY_Auto_Repair videos on #EyeOnAiman Youtube Channel & Facebook Page.
Note: This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. As an Amazon Associate we earn from qualifying purchases.
Recording Date: September 10, 2021
Video URL: How To Remove, Re-Install Or Replace ...
1. https://amzn.to/3DTrNcd | Belt Tensioner Compatible with Honda Insight 2010-2013 CR-Z 2011-2014
2. https://amzn.to/3EWD3pW | A-Premium Accessory Drive Belt Tensioner Assembly Replacement for Honda CR-Z 2011-2014 Insight 2010-2013
3. https://amzn.to/31UPDYd | Powerbuilt Alltrade 648629 Kit 52 Serpentine Belt Tool Set
4. https://amzn.to/3oK6Zjb | ACDelco Specialty K081264HD Heavy Duty V-Ribbed Serpentine Belt
5. https://amzn.to/3DPCxIA | Serpentine Belt Wrench Tool Equipment Hand Tool Removing Installing Tool Serp Belt Wrench for Acura Accord CR-V Civic
Or Click on Amazon link here and search for what you need: https://amzn.to/3xIOsqg
Changing the belt is an easy task and requires no special tools. You'll need to remove the covers under the engine to get access from below. While you're at it, replace the idler pully as well. The bearings eventually go on these and they're not expensive. The diagram as well as pictures of the pulleys - idler tensioner, AC compressor, crankshaft & power steering pump are shown in the video. There is no alternator pulley for IMA Insight.
Steps:
1. Open the hood/bonnet.
2. Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
3. Lift the car using a jack or place it over an inspection pit.
4. Undo the fasteners of the oil pan lower cover. Use a Phillips screwdriver. Use a clip removal
tool.
5. Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
6. Remove the wheel arch cover.
7. Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
8. Remove the V-ribbed belt.
9. Return the tensioner pulley to its initial position.
10. Install the V-ribbed belt.
11. Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
12. Place the V-ribbed belt on the tensioner pulley.
13. Return the tensioner pulley to its initial position. Use a combination spanner #14.
14. Run the engine for a few minutes. This is necessary in order to make sure that the component
operates properly.
15. Shut off the engine.
16. Install the wheel arch cover to its mounting seat.
17. Install and tighten the wheel arch cover fasteners.
18. Tighten the fasteners of the oil pan lower cover. Use a Phillips screwdriver.
19. Lower the car.
20. Remove the fender protection cover.
21. Close the hood.
Source (Credits): https://club.autodoc.co.uk/pdf-manual...
This procedure can be used for:
HONDA INSIGHT HYBRID 1.3 (ZE_, ZE2, ZE28, ZE2) & HONDA JAZZ III (GE_, GG_, GP_, ZA_, GP1)
Honda Insight:
The Honda Insight is a hybrid electric vehicle that was manufactured and marketed by Honda in its first generation as a two-door, two passenger liftback (1999–2006) and in its second generation as a four-door, five passenger liftback (2009–2014). In its third generation, it became a four-door sedan (2019–present). It was Honda's first model with Integrated Motor Assist system and the most fuel efficient gasoline-powered car available in the U.S. without plug-in capability. EPA estimates for the first-generation Insight were 61 City/70 Highway/65 Combined.
Second generation (ZE2/ZE3; 2010–2014):
The new Insight includes Honda's fifth generation of its Integrated Motor Assist (IMA) hybrid system. This system mates an internal combustion engine with an electric motor mounted directly to the engine's crankshaft between the engine and transmission.
Thanks for watching, please check our other DIY auto repair tutorial & guide videos on EyeOnAiman's channel. Other cars Aiman have worked on includes Honda Accord, Civic, Insight, CR-V, Hyundai Santa Fe, Elantra and Toyota Prius Hybrid.
Obviously, Aiman's auto repair videos are mostly designed for entertainment purposes. Aiman is not a professional and not a certified ASE mechanic. The videos should always be used only as a guide.
You can watch all of Aiman's auto repair videos in the following playlist: How To Remove Alternator Hyundai Sona...
This video is presented to you by Aiman-Imran Anuar. You can watch more of #Aiman_DIY_Auto_Repair videos on #EyeOnAiman Youtube Channel & Facebook Page.
Note: This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. As an Amazon Associate we earn from qualifying purchases.
Recording Date: September 10, 2021
Video URL: How To Remove, Re-Install Or Replace ...
3 سال پیش
در تاریخ 1400/09/22 منتشر شده
است.
4,804
بـار بازدید شده