Calibrating ignition coil dwell time for a Bosch GT40 [Datsun 240Z ITB EFI L28 Stroker]
971 بار بازدید -
3 سال پیش
-
Calibrating ignition coil dwell time
Calibrating ignition coil dwell time for a Bosch GT40 [Datsun 240Z ITB EFI L28 Stroker]
Now that I have the technology, I thought I’d verify and calibrate the dwell time for my ignition coil and in situ setup. The tools I used are listed below.
- Picoscope 2204A
- Hantek HT25 secondary ignition pickup
- Hantek CC-65 amp clamp
**LINKS**
Instagram: https://www.instagram.com/built_on_purpose/
Facebook: https://www.facebook.com/builtonpurpose1
Patreon: https://www.patreon.com/builtonpurpose
Podcast: https://podcasters.spotify.com/pod/show/mtwrr
Shop: https://kyushaspeed.com.au/
**CHAPTERS**
https://www.seevid.ir/fa/w/8uBblPTaj98 Intro
https://www.seevid.ir/fa/w/8uBblPTaj98 Purpose of the investigation
https://www.seevid.ir/fa/w/8uBblPTaj98 Investigation method
https://www.seevid.ir/fa/w/8uBblPTaj98 Investigation results
https://www.seevid.ir/fa/w/8uBblPTaj98 Possible errors in the investigation
https://www.seevid.ir/fa/w/8uBblPTaj98 What the results mean for my build
https://www.seevid.ir/fa/w/8uBblPTaj98 Outro
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DISCLAIMER: I am not a mechanic or tuner. This video is for entertainment purposes only and is not to be used an instruction or a guide for your own activities. Copying modifications described in this video is at your own risk.
DISCLOSURE: From time to time I will provide a link to a product I regularly use or think you might find helpful. Some products may be part of an affiliate program and this will normally be clearly explained in the video. Purchasing a product from one of these links provides a small amount of income and is a means to support the channel.
3 سال پیش
در تاریخ 1400/09/05 منتشر شده
است.
971
بـار بازدید شده