50 Watt Hiwatt Clone (Weber 6H50)

imagimotion
imagimotion
23.6 هزار بار بازدید - 14 سال پیش - This is a demonstration of
This is a demonstration of the 50 Watt Hiwatt clone I just finished building from a Weber 6H50 kit.  I modified the stock circuit by replacing all the signal capacitors with higher grade Mallory caps.  The amp has 4 12AX7 preamp tubes and 2 KT-66 power tubes.  The amp is being played through a 4x12 Peavey 5150 cabinet loaded with Celestion G12T-75 speakers.  The audio was recorded with an SM57 miking the cabinet and recorded directly into a MOTU Traveler interface.  I used a PRS SE Singlecut on the bridge pickup to demonstrate the amp.

Please excuse my playing.  It's been a while, and I'm a bit rusty.  Plus, the guitar does go out of tune in a few spots, so I apologize in advance.
14 سال پیش در تاریخ 1389/12/25 منتشر شده است.
23,629 بـار بازدید شده
... بیشتر