Homemade EDM Sinker

After building our latest homemade CNC machine (check out that video) we found ourselves never using our older DIY CNC machine. We thought hard about what to do with it, and decided to turn it into a dedicated EDM machine. After all, it's an extremely rigid epoxy granite CNC machine with a perfectly fine X Y Z motion system. We hope that getting a good working EDM sinker machine will help us produce higher quality molds for our homemade plastic injection machine.

While this was just our first round of testing, we will continue to work on this DIY machine and turn it into a proper homemade CNC EDM Sinker Machine.

Make sure to follow our CNC adventures by hitting the SUBSCRIBE button right away - it helps our channel grow!

If you are interested in turning your own equipment into an EDM for broken tap removal or to cut hard metals such as carbide, feel free to support our channel by purchasing the power supply from us at https://actionbox.ca/products/edm-pow...


We built a CNC Machine
Homemade CNC Machine! (6 months of wo...

We built a Wire EDM
How We Made A Wire EDM Machine At Home

We built an EDM Sinker
Homemade EDM Sinker

We built a Plastic Injection Machine
Homemade Plastic Injection Machine | DIY

We built an Anodizing Setup
Homemade Anodizing Setup

We built CNC Router
HOMEMADE CNC ROUTER.

#CNC #machineshop #DIY #epoxy #mill #engineering #machine

• #science_technology
• #cnc_diy_homemade_wire_edm_machine
• #cnc
• #wire_edm
• #diy_cnc
• #homemade_edm
• #edm_sinker