Loopback Configuration in OLT | Loop back issue resolved |
10.6 هزار بار بازدید -
2 سال پیش
-
About :A loopback issue in
About :
A loopback issue in an OLT (Optical Line Terminal) can occur when a network device receives its own transmitted data and mistakes it for data from another device. This can cause network issues and errors. Here is a general process for configuring a loopback issue in an OLT:
1.Connect to the OLT: Connect your computer or laptop to the OLT's management interface using an Ethernet cable.
2.Access the OLT's management interface: Open a terminal or Telnet client and enter the OLT's IP address and port number to access the management interface.
3.Login to the OLT: Enter the username and password for the OLT's management interface.
4.Verify the loopback issue: Use the appropriate command to verify the loopback issue and the status of the interfaces.
5.Configure the interfaces: Use the appropriate commands to configure the interfaces and resolve the loopback issue. For example, you may need to disable or remove the loopback configuration on one of the interfaces.
6.Save the changes: Apply the changes and save the new configuration.
Note: The exact steps and commands for configuring a loopback issue in an OLT may vary depending on the OLT model and software version, as well as the network configuration. If you have difficulty accessing the OLT's management interface or resolving the loopback issue, contact your service provider or a network administrator for assistance.
|
More Video's Details :
Please Like and Subscribe to My Channel :
@mtnetworksolutions
More Video's Link
EPON OLT Configuration :
epon olt configuration with bsnl serv...
GPON OLT profile Configuration :
gpon olt profile configuration | gpon...
All OLT Configuration :
EPON AND GPON OLT CONFIGURATION DETAILS
All ONT Configuration :
Sharp Vision ONT Router COnfiguration
Thanks for watching My channel
A loopback issue in an OLT (Optical Line Terminal) can occur when a network device receives its own transmitted data and mistakes it for data from another device. This can cause network issues and errors. Here is a general process for configuring a loopback issue in an OLT:
1.Connect to the OLT: Connect your computer or laptop to the OLT's management interface using an Ethernet cable.
2.Access the OLT's management interface: Open a terminal or Telnet client and enter the OLT's IP address and port number to access the management interface.
3.Login to the OLT: Enter the username and password for the OLT's management interface.
4.Verify the loopback issue: Use the appropriate command to verify the loopback issue and the status of the interfaces.
5.Configure the interfaces: Use the appropriate commands to configure the interfaces and resolve the loopback issue. For example, you may need to disable or remove the loopback configuration on one of the interfaces.
6.Save the changes: Apply the changes and save the new configuration.
Note: The exact steps and commands for configuring a loopback issue in an OLT may vary depending on the OLT model and software version, as well as the network configuration. If you have difficulty accessing the OLT's management interface or resolving the loopback issue, contact your service provider or a network administrator for assistance.
|
More Video's Details :
Please Like and Subscribe to My Channel :
@mtnetworksolutions
More Video's Link
EPON OLT Configuration :
epon olt configuration with bsnl serv...
GPON OLT profile Configuration :
gpon olt profile configuration | gpon...
All OLT Configuration :
EPON AND GPON OLT CONFIGURATION DETAILS
All ONT Configuration :
Sharp Vision ONT Router COnfiguration
Thanks for watching My channel
2 سال پیش
در تاریخ 1401/09/08 منتشر شده
است.
10,643
بـار بازدید شده