HUBDOCTOR PRO MAVIC FREEHUB CONVERSION KIT for Mavic Ksyrium Elite freeplay issue
48.7 هزار بار بازدید -
5 سال پیش
-
The HubDoctor® Pro FULL HYBRID
The HubDoctor® Pro FULL HYBRID CERAMIC Ball Bearing Conversion Kit for Mavic® Freehubs With 9mm Aluminum Axle nut ~ MTB and Road 2013 and Up Only.
Get rid of the plastic bushing once and for all! Runs quieter too! Fits seamlessly into your hub, no special spacers required; looks identical from the outside. (The freehub bearings only spin when you are coasting). Don't replace your worn out hub (see last picture) - rebuild it - with HubDoctor® PRO!
Convert your Mavic® Shimano or Campy Freehub to a full CERAMIC ball bearing system. Please note the photos of both of these hub types in pictures. The freehub is not included; this kit upgrades your freehub whether it is a Campy or Shimano type.
The New HubDoctor® PRO kit features a dual sealed Hybrid Ceramic ball bearing with a full complement of 56 Si3N4 balls.
***The ultimate upgrade for Mavic® MTB or Road wheels using the FTS-L and FTS-X freehubs! Weighs only 12 grams!***
Fits Mavic® ROAD and MTB wheels with plastic inner bushing: Ksyrium, Aksium, Cosmic, Helium, Crossmax SL-Enduro-XL- SLR-ST-29-SX-UB, Deetraks, Deemax, Crossland, Crossland, Crosstrail, Crossride UB, R-SYS, Cosmic Carbon SL, Comet Route, Speedcity with FTS-L and FTS-X hubs (42.50mm or 1.67" long), 2013 and up ONLY. Note: Does not fit ITS 4 or ID360 freehubs.
Note: For 2012 and earlier click here for our NEW! HUBDOCTOR PRO MAVIC FREEHUB REBUILD KIT HYBRID CERAMIC BEARINGS! listing.
Kit contents: inner hybrid ceramic ball bearing and outer ball bearing (Si3N4), 6061-T6 aluminum freehub adapter, 1 outer seal, 1 inner seal, 1 inner spacer, 1 sanding tool and sand paper, detailed instructions to walk you through installation.
WHERE TO BUY
NEW! HUBDOCTOR PRO MAVIC FREEHUB CONVERSION KIT HYBRID CERAMIC BEARINGS!
https://www.ebay.com/itm/NEW-HUBDOCTO...
or
2013 & Up HUBDOCTOR PRO MAVIC FREEHUB CONVERSION KIT WITH 9MM AXLE NUT
https://www.ebay.com/itm/2013-Up-HUBD...
I got the one with axle nut cause my axle nut was broken
Get rid of the plastic bushing once and for all! Runs quieter too! Fits seamlessly into your hub, no special spacers required; looks identical from the outside. (The freehub bearings only spin when you are coasting). Don't replace your worn out hub (see last picture) - rebuild it - with HubDoctor® PRO!
Convert your Mavic® Shimano or Campy Freehub to a full CERAMIC ball bearing system. Please note the photos of both of these hub types in pictures. The freehub is not included; this kit upgrades your freehub whether it is a Campy or Shimano type.
The New HubDoctor® PRO kit features a dual sealed Hybrid Ceramic ball bearing with a full complement of 56 Si3N4 balls.
***The ultimate upgrade for Mavic® MTB or Road wheels using the FTS-L and FTS-X freehubs! Weighs only 12 grams!***
Fits Mavic® ROAD and MTB wheels with plastic inner bushing: Ksyrium, Aksium, Cosmic, Helium, Crossmax SL-Enduro-XL- SLR-ST-29-SX-UB, Deetraks, Deemax, Crossland, Crossland, Crosstrail, Crossride UB, R-SYS, Cosmic Carbon SL, Comet Route, Speedcity with FTS-L and FTS-X hubs (42.50mm or 1.67" long), 2013 and up ONLY. Note: Does not fit ITS 4 or ID360 freehubs.
Note: For 2012 and earlier click here for our NEW! HUBDOCTOR PRO MAVIC FREEHUB REBUILD KIT HYBRID CERAMIC BEARINGS! listing.
Kit contents: inner hybrid ceramic ball bearing and outer ball bearing (Si3N4), 6061-T6 aluminum freehub adapter, 1 outer seal, 1 inner seal, 1 inner spacer, 1 sanding tool and sand paper, detailed instructions to walk you through installation.
WHERE TO BUY
NEW! HUBDOCTOR PRO MAVIC FREEHUB CONVERSION KIT HYBRID CERAMIC BEARINGS!
https://www.ebay.com/itm/NEW-HUBDOCTO...
or
2013 & Up HUBDOCTOR PRO MAVIC FREEHUB CONVERSION KIT WITH 9MM AXLE NUT
https://www.ebay.com/itm/2013-Up-HUBD...
I got the one with axle nut cause my axle nut was broken
5 سال پیش
در تاریخ 1398/03/29 منتشر شده
است.
48,778
بـار بازدید شده