Taig Lathe - Drilling Center Holes to a Specific Depth
30.1 هزار بار بازدید -
7 سال پیش
-
Drilling to depth on the
Drilling to depth on the Taig Lathe with the tailstock, center drills, twist drills, and a trick for quickly setting the drilling depth by registering off of the carriage. In this demo, a 3/8" hole is drilled on center to a depth of 1/2". There is a nice jam that shows what can go wrong and a trick for a quick way to locate the tailstock for drilling to specific depths with the lever action tailstock.
Using these links helps support this channel!
HSS Twist Drills: http://amzn.to/2xfaTTc
Center drills: http://amzn.to/2xftLlb
6 inch rule: http://amzn.to/2ymAfDB
Main Camera: http://amzn.to/2wXAXqU
Lapel Mic: http://amzn.to/2xRyH1x
Lathe: https://desktoplathes.com/product-cat...
Using these links helps support this channel!
HSS Twist Drills: http://amzn.to/2xfaTTc
Center drills: http://amzn.to/2xftLlb
6 inch rule: http://amzn.to/2ymAfDB
Main Camera: http://amzn.to/2wXAXqU
Lapel Mic: http://amzn.to/2xRyH1x
Lathe: https://desktoplathes.com/product-cat...
7 سال پیش
در تاریخ 1396/07/11 منتشر شده
است.
30,129
بـار بازدید شده