Repacking Ball Nut RM-16 C7 Ball Screw
102.5 هزار بار بازدید -
8 سال پیش
-
Some times the ball get
Some times the ball get loose and you need to repack the import ball screws. I do this all the time for the G0704 and PM-25 CNC kits I sell so I wanted to show you guys how I do it.
The ball screw is a C7 16mm 5mm pitch screw but most ball nuts with internal ball returns are the same.
Finding the right size is hard. I do offer repacking for any ball screw if you need it. Most the time you can get .002" or less backlash. A good screw will give .001"
Contact me at [email protected] if you need a nut packed.
The ball screw is a C7 16mm 5mm pitch screw but most ball nuts with internal ball returns are the same.
Finding the right size is hard. I do offer repacking for any ball screw if you need it. Most the time you can get .002" or less backlash. A good screw will give .001"
Contact me at [email protected] if you need a nut packed.
8 سال پیش
در تاریخ 1395/03/21 منتشر شده
است.
102,588
بـار بازدید شده