Building an Arduino-based Car Parking System with IR Sensor: A Comprehensive Tutorial

In this comprehensive tutorial, you will learn how to build an Arduino-based car parking system using an IR sensor. The tutorial will guide you through the step-by-step process of creating your own parking system from scratch.
Starting with an introduction to the components and tools needed, you will gain a clear understanding of the project requirements. You will then delve into the detailed wiring instructions, connecting the Arduino board and IR sensor effectively.
Once the hardware setup is complete, the tutorial will walk you through the programming aspect. You will learn how to write the necessary code to interface the IR sensor with the Arduino board. This code will enable the system to detect the presence of vehicles and provide real-time feedback.
Furthermore, you will explore how to calibrate the IR sensor for optimal performance and accuracy. The tutorial will explain the principles behind the sensor's operation and guide you in adjusting its sensitivity to match your specific parking space requirements.
Throughout the tutorial, troubleshooting tips and common challenges will be addressed to help you overcome any obstacles you may encounter during the process.
By the end of this tutorial, you will have gained valuable knowledge and hands-on experience in building an Arduino-based car parking system using an IR sensor. You will be able to apply your newfound skills to create custom parking solutions and enhance your understanding of Arduino programming and sensor integration.
Download Code:
https://drive.google.com/drive/folder...

Components:
Arduino Uno
2 IR sensor
Servo motor
Breadboard (400 pin)
Jumper wire
I2C Module
7 Segment LCD Display
Battery Holder
3.7v Lithium Battery (2)