Woodturning - This Wood is OVER 400 years old, and from my family's Home!
24.7 هزار بار بازدید -
9 ماه پیش
-
This is a bowl made
This is a bowl made from wood from my family's home, it's over 400 years old! My dad has asked me to make a peanut bowl for a long time and I found this piece of wood that fit my historic and design criteria perfectly. it's an offcut from a 400 year old beam from our Stuart era house.
the piece has been sanded to 2000 grit and finished with food safe oil, and wood wax on the outside.
Disclaimer: That is my brother burping ... and other non alcoholic drinks are available 😉👍
Axminster tools used in this video:
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
________________________________________________________________
Social Media:
Instagram: harrysmith_woodturning
TikTok: @harrysmithwoodturning
Second Channel: harrysmithshorts
Designed By HS Channel: @designedbyhs
Email for quotes and queries: [email protected]
__________________________________________________________________________
Starbond:
Use the code: HarrySmith , for 10% OFF Site-Wide - https://starbond.com/
__________________________________________________________________________
Axminster:
This channel is supported by Axminster. Use this link to support the channel, and buy your own Axminster equipment. https://www.tagserve.com/clickServlet...
__________________________________________________________________________
This video was edited by Charlie - [email protected]
__________________________________________________________________________
For the custom coins used in the bottom of my pieces head to vonHanke on etsy: https://www.etsy.com/uk/listing/79628...
__________________________________________________________________________
Disclaimer:
My videos are for entertainment purposes only. Some of my techniques might not be the "best" or safest, so when using any tool or machinery always read and understand safety/manufacturers guidelines first.
And Yes, I'm aware that wearing gloves while woodturning is considered an unsafe practice. The gloves I wear are tight-fitting and don’t have any loose threads. I wear them for the protection of my skin. This is a risk that I am willing to take, however I am still very conscious of the potential danger and I do not touch any spinning parts of the lathe. DO NOT copy my actions if you feel unsafe doing so.
the piece has been sanded to 2000 grit and finished with food safe oil, and wood wax on the outside.
Disclaimer: That is my brother burping ... and other non alcoholic drinks are available 😉👍
Axminster tools used in this video:
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
https://www.tagserve.com/clickServlet...
________________________________________________________________
Social Media:
Instagram: harrysmith_woodturning
TikTok: @harrysmithwoodturning
Second Channel: harrysmithshorts
Designed By HS Channel: @designedbyhs
Email for quotes and queries: [email protected]
__________________________________________________________________________
Starbond:
Use the code: HarrySmith , for 10% OFF Site-Wide - https://starbond.com/
__________________________________________________________________________
Axminster:
This channel is supported by Axminster. Use this link to support the channel, and buy your own Axminster equipment. https://www.tagserve.com/clickServlet...
__________________________________________________________________________
This video was edited by Charlie - [email protected]
__________________________________________________________________________
For the custom coins used in the bottom of my pieces head to vonHanke on etsy: https://www.etsy.com/uk/listing/79628...
__________________________________________________________________________
Disclaimer:
My videos are for entertainment purposes only. Some of my techniques might not be the "best" or safest, so when using any tool or machinery always read and understand safety/manufacturers guidelines first.
And Yes, I'm aware that wearing gloves while woodturning is considered an unsafe practice. The gloves I wear are tight-fitting and don’t have any loose threads. I wear them for the protection of my skin. This is a risk that I am willing to take, however I am still very conscious of the potential danger and I do not touch any spinning parts of the lathe. DO NOT copy my actions if you feel unsafe doing so.
9 ماه پیش
در تاریخ 1402/08/07 منتشر شده
است.
24,724
بـار بازدید شده