LED TV Repair Tutorial - Common Symptoms & Solutions - How to Repair LED TVs
909.8 هزار بار بازدید -
11 سال پیش
-
LED TV Repair Review &
LED TV Repair Review & Overview-Common Problems - Symptoms, Solutions
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com/catalogsearc...
Before you begin your repair be sure to unplug your TV from any power source and properly ground yourself.
We have already removed the back cover of our TV, but you will want to remove all the screws connecting your back cover to your TV and then simply remove the back cover piece.
Over here we have the main board. The main board controls your TVs inputs and outputs, this main board is connected to the backlight inverter/LED driver via this ribbon cable.
Right here we have the backlight inverter/LED driver. This is what supplys power to turn on the backlighting for the TV. LED TVs are basically the same as LCD TVs with one real exception, the source of illumination for the screen and the board that drives that illumination. LED TVs use LED backlights as opposed to LCD TVs which use CCFLs, cold cathode fluorescent lamps. The screen though on an LED TV and LCD TV are the same.
This TV has two power supply boards. Here we have the G7 power supply board, this provides power to the backlight inverter/LED driver via this cable. The two power supply boards are connected to each other right here. The other power supply is called the G6 power supply. The G6 power supply connects to the main board and to a power saving switch located on the outside of the TV. That goes to the switch, this connection here goes to the main board.
Now we have already removed the cover for our T-con board right here, but this LED driver also has a cover. Here is what the T-con board cover looked like originally before we unscrewed it. So if you are doing any repairs to the backlight inverter/LED driver or the T-con board, you will need to remove the covers for each of them, before you replace the board.
Removing the covers can be simply done by removing the screws that hold them to the panel. The T-con board actually takes the image and sends it to the panel which makes it show up on your screen. You can see the T-con board is connected to the LED driver/backlight inverter here and then connects to the panel via these cables here.
One of the most common problems with an LED TV is that the TV will not turn on. If your TV will not turn on and you have no power on your TV, that is most likely a problem with the power supply.
Here are some common symptoms that LED TVs can show that could be a bad main board. If your inputs are not working and you have no signal from the HDMI connection, the tuner connection, the RCA connection or any of those connections etc. That could be a bad main board. If your TV has no audio. If your TV set restarts on its own while powered on, that could be a bad main board. The LED driver is similar to an LCD TVs backlight inverter, so the most common problem here is that you wouldn't have lighting from the LED driver. So your TV would turn on, you could have sound but you would have no image on the screen and no backlights.
Once again, you could use a flashlight and run the flashlight test on your TV. We will put up the link right now on the video for the flashlight test and you can learn how to determine with a flashlight if your TV has back lighting or not. If you find out that your TV does not have back lighting this would be the most common problem here, the LED driver.
Some common problems with the T-con board, is that if you have no picture on your screen but your TV does have backlights and sound, that could be the T-con. Earlier we said it could be the main board, but the T-con could also be at fault if that is the symptom. You could also have colored vertical lines on your screen or half of the screen is missing the picture. Those would both be symptoms that could be a bad T-con board.
TV Repair Made Easy™
© 2014 ShopJimmy.com, LLC.
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com/catalogsearc...
Before you begin your repair be sure to unplug your TV from any power source and properly ground yourself.
We have already removed the back cover of our TV, but you will want to remove all the screws connecting your back cover to your TV and then simply remove the back cover piece.
Over here we have the main board. The main board controls your TVs inputs and outputs, this main board is connected to the backlight inverter/LED driver via this ribbon cable.
Right here we have the backlight inverter/LED driver. This is what supplys power to turn on the backlighting for the TV. LED TVs are basically the same as LCD TVs with one real exception, the source of illumination for the screen and the board that drives that illumination. LED TVs use LED backlights as opposed to LCD TVs which use CCFLs, cold cathode fluorescent lamps. The screen though on an LED TV and LCD TV are the same.
This TV has two power supply boards. Here we have the G7 power supply board, this provides power to the backlight inverter/LED driver via this cable. The two power supply boards are connected to each other right here. The other power supply is called the G6 power supply. The G6 power supply connects to the main board and to a power saving switch located on the outside of the TV. That goes to the switch, this connection here goes to the main board.
Now we have already removed the cover for our T-con board right here, but this LED driver also has a cover. Here is what the T-con board cover looked like originally before we unscrewed it. So if you are doing any repairs to the backlight inverter/LED driver or the T-con board, you will need to remove the covers for each of them, before you replace the board.
Removing the covers can be simply done by removing the screws that hold them to the panel. The T-con board actually takes the image and sends it to the panel which makes it show up on your screen. You can see the T-con board is connected to the LED driver/backlight inverter here and then connects to the panel via these cables here.
One of the most common problems with an LED TV is that the TV will not turn on. If your TV will not turn on and you have no power on your TV, that is most likely a problem with the power supply.
Here are some common symptoms that LED TVs can show that could be a bad main board. If your inputs are not working and you have no signal from the HDMI connection, the tuner connection, the RCA connection or any of those connections etc. That could be a bad main board. If your TV has no audio. If your TV set restarts on its own while powered on, that could be a bad main board. The LED driver is similar to an LCD TVs backlight inverter, so the most common problem here is that you wouldn't have lighting from the LED driver. So your TV would turn on, you could have sound but you would have no image on the screen and no backlights.
Once again, you could use a flashlight and run the flashlight test on your TV. We will put up the link right now on the video for the flashlight test and you can learn how to determine with a flashlight if your TV has back lighting or not. If you find out that your TV does not have back lighting this would be the most common problem here, the LED driver.
Some common problems with the T-con board, is that if you have no picture on your screen but your TV does have backlights and sound, that could be the T-con. Earlier we said it could be the main board, but the T-con could also be at fault if that is the symptom. You could also have colored vertical lines on your screen or half of the screen is missing the picture. Those would both be symptoms that could be a bad T-con board.
TV Repair Made Easy™
© 2014 ShopJimmy.com, LLC.
11 سال پیش
در تاریخ 1392/10/13 منتشر شده
است.
909,834
بـار بازدید شده