How to program the settings on the Leviton Decora Motion Sensor light switch
178.4 هزار بار بازدید -
3 سال پیش
-
Learn how to change the
Learn how to change the settings on your Leviton Decora Occupancy and Vacancy Motion Sensor Light Switch including, changing the timer (time out) setting, sensitivity setting and ambient light setting. It will also review the different temporary modes of operation, test mode and temporary off mode.
0:23 – Introduction to your Decora Motion Sensor Switch – Getting familiar with the sensor and indicator lights
0:48 – Overview of the sensor settings
1:35 –Timer setting
2:21 – Sensitivity setting
3:00 – Ambient light setting (occupancy sensor models only)
3:57 – Understanding the blinking red and green lights while in programming mode
4:53 – How to enter into the programming mode
6:33 – How to save settings and exit programming mode
6:51 – Demonstration on how to change the timer setting
7:44 – Temporary modes of operation
0:23 – Introduction to your Decora Motion Sensor Switch – Getting familiar with the sensor and indicator lights
0:48 – Overview of the sensor settings
1:35 –Timer setting
2:21 – Sensitivity setting
3:00 – Ambient light setting (occupancy sensor models only)
3:57 – Understanding the blinking red and green lights while in programming mode
4:53 – How to enter into the programming mode
6:33 – How to save settings and exit programming mode
6:51 – Demonstration on how to change the timer setting
7:44 – Temporary modes of operation
3 سال پیش
در تاریخ 1400/10/15 منتشر شده
است.
178,431
بـار بازدید شده