Electronics Basics for Pinball Designers - How to Wire Pinball Machines 1/6
1.1 هزار بار بازدید -
3 سال پیش
-
What you should know about
What you should know about electronics when designing a pinball machine. We will cover ohms law with some practical examples. This is part 1 out of 6 of series about how to wire pinball machines.
Disclaimer: This video does not replace advice from a professional electric engineer. It will only give you an overview about what exists. Please consult a professional electronic engineer if in doubt.
0:00 - Welcome
0:06 - Electronics Basics - Voltages in Pinball Machines
4:08 - Example: Voltage, Current and Power for LEDs
6:26 - Example: Voltage, Current and Power for Coils
8:23 - Coils and Wires
10:02 - Outro
Broadcasted live on Twitch -- Watch live at Twitch: jabdoa
Disclaimer: This video does not replace advice from a professional electric engineer. It will only give you an overview about what exists. Please consult a professional electronic engineer if in doubt.
0:00 - Welcome
0:06 - Electronics Basics - Voltages in Pinball Machines
4:08 - Example: Voltage, Current and Power for LEDs
6:26 - Example: Voltage, Current and Power for Coils
8:23 - Coils and Wires
10:02 - Outro
Broadcasted live on Twitch -- Watch live at Twitch: jabdoa
3 سال پیش
در تاریخ 1400/04/17 منتشر شده
است.
1,144
بـار بازدید شده