Big Blue Live2 Wireless Bluetooth Speaker How to Video

Get yours today bit.ly/Big_Blue_Live2_How_To Video transcript: To get started with your Big Blue Live2, let’s first take it out of the box. You should have the: Big Blue Live2 Speaker, the USB charging cord, and the AC/DC adapter First, make sure that the travel lock is switched to the unlocked position. Then you will need to charge the speaker. To do so, insert the Micro USB Cable’s micro USB connector into the Micro USB port on the speaker. Then insert the other end of the cable into the wall adapter and plug the adapter into a standard wall outlet. The charging LED indicator is red while the speaker is charging and then turns green when the speaker is fully charged, which takes at least 4.5 hours. Once the speaker is charged, you’re ready to pair. Make sure the Bluetooth is enabled on your device. Press and hold the Power Button until the Power Pairing LED starts flashing to put the speaker in pairing mode. Select Big Blue Live 2.0 from the list of Bluetooth devices, and if prompted use 0000 as a pin for the pairing code. When Big Blue Live is selected, the Power Pairing LED will be solid blue and the pairing successful tone will sound to confirm pairing is complete. If you have two Big Blue Live2 speakers you can pair them together for stereo or left/right sound. First pair your device to the first speaker. Once that is done, then you can press and hold the Power Button on the second speaker until the Power Pairing LED turns on and the power on tone sounds. Then press the Pair2 Button on the first speaker (the speaker that is paired to your device). The Power Pairing LED will start flashing and audio will pause on the first speaker. The first speaker will wait for a Pair2 connection for up to two minutes. Press and hold the Pair2 Button on the second speaker until the Power Pairing LED starts flashing. After a few seconds, the Power Pairing LEDs will be solid, the Pair2 stereo tone will sound on each speaker and the speakers will be in stereo mode. To put the speakers into left/right mode, press and hold the Pair2 button on the first speaker or the second speaker until the Pair 2 left and right tones sound on each speaker. To put the speakers back into stereo mode, press and hold the Pair2 button on the first speaker or the second speaker until the Pair2 stereo tones sound on each speaker. To exit out of Pair 2 Stereo or left/right modes, power either speaker off by pressing the Power Button. For more information about this and our other great speakers, check us out at Brookstone.com.