How To Align A Scanned Mesh To Other Meshes /Features In Fusion 360 #reverseengineering #fusion360
10 هزار بار بازدید -
پارسال
-
In this video we are
In this video we are going to go over how to manually align meshes with other meshes or features in Fusion 360. The use case would be if you have multiple mesh bodies and you need to align them based on some feature on each scan. In this video we are going to go over 4 main steps to accomplish this.
Step 1: Create a component for your mesh
Step 2: Remesh/Reduce a copy of your mesh so you don't bog down the system
Step 3: Create planes or features in the component for alignment
Step 4: Use Move/Copy, Align, or Joints to put your parts together.
If you want to follow along you can download the dataset here which contains the 5 speed scan from my Mitsubishi Starion.
https://a360.co/432Rzax
Step 1: Create a component for your mesh
Step 2: Remesh/Reduce a copy of your mesh so you don't bog down the system
Step 3: Create planes or features in the component for alignment
Step 4: Use Move/Copy, Align, or Joints to put your parts together.
If you want to follow along you can download the dataset here which contains the 5 speed scan from my Mitsubishi Starion.
https://a360.co/432Rzax
پارسال
در تاریخ 1402/04/02 منتشر شده
است.
10,098
بـار بازدید شده