2020 - 2024+ Ford Transit Radio Install
50.1 هزار بار بازدید -
2 سال پیش
-
Parts linked in the description
Parts linked in the description below!
Watch a full tutorial as this 2022 Ford Transit will have a brand new 11" Alpine float mount screen installed. This new radio features a single din chassis and an oversized float mount screen which fits in the factory location. This install retains the steering wheel volume controls, Ford Sync module, and factory OEM backup camera.
This video applies to Ford Transit models for years 2020, 2021, 2022, 2023, and 2024+. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the Aline 11" Radio unboxing and demo:
GIANT 11" Alpine Wireless Carplay / A...
Click here to see the radio disassembly of a non-sync radio version:
2020 - 2023+ Ford Transit Radio Removal
NOTE for NON-SYNC models: For Non-Sync models when retaining the backup camera, you may or may not have to modify the backup camera depending if the ground for the camera RCA cable in the Axxess harness is pinned in the correct location. If your image doesn't come through clear, move the camera ground wire in the Axxess harness (black) and connect it to the center channel blue wire location (Pin 24 on radio harness). Also, the Transit usually puts out about .5 or .6 volts for the video signal, and some headunits (like pioneer), require at least 1 volt of signal to recognize a video signal. If you are using a pioneer, you may need an RCA video voltage booster.
NOTE for SYNC models: The factory USB ports are on a HUB system, which prevents you to integrate those USB ports to the new aftermarket radio. If you leave those USB port cable connected to the SYNC module, it they still will remain as a full time charge only.
Parts used in this install (Amazon Associate Paid Links):
---Ford Transits WITH factory SYNC system
*Alpine iLX-F511 11" Float Mount Radio: https://amzn.to/3FXKUX0
*Metra 107-FD1B Dash Kit: https://amzn.to/3BEuLTW
*Axxess AXTC-FD3 Wiring Harness Adapter: https://amzn.to/3hvlCGl
*Axxess AXBUCH-FD1 (For Sync Backup Camera): https://amzn.to/3hxlIxc
*Metra 40-EU10: https://amzn.to/2UKAuop
*Panel Tool Kit: https://amzn.to/3C4aUed
---Ford Transits WITH OUT factory SYNC system
*Alpine iLX-F511 11" Float Mount Radio: https://amzn.to/3FXKUX0
*Metra 107-FD1B Double Din Dash Kit: https://amzn.to/3BEuLTW
*Axxess AXTC-FD3): https://amzn.to/3hvlCGl
*Metra 40-EU10: https://amzn.to/2UKAuop
*PAC USB-GM1 USB Adapter (Two Needed): https://amzn.to/3h3HowD
*Panel Tool Kit: https://amzn.to/3C4aUed
Disclosure: As an Amazon Associate I earn from qualifying purchases
If you have any questions, leave a comment below! Be sure to like and subscribe!
Watch a full tutorial as this 2022 Ford Transit will have a brand new 11" Alpine float mount screen installed. This new radio features a single din chassis and an oversized float mount screen which fits in the factory location. This install retains the steering wheel volume controls, Ford Sync module, and factory OEM backup camera.
This video applies to Ford Transit models for years 2020, 2021, 2022, 2023, and 2024+. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the Aline 11" Radio unboxing and demo:
GIANT 11" Alpine Wireless Carplay / A...
Click here to see the radio disassembly of a non-sync radio version:
2020 - 2023+ Ford Transit Radio Removal
NOTE for NON-SYNC models: For Non-Sync models when retaining the backup camera, you may or may not have to modify the backup camera depending if the ground for the camera RCA cable in the Axxess harness is pinned in the correct location. If your image doesn't come through clear, move the camera ground wire in the Axxess harness (black) and connect it to the center channel blue wire location (Pin 24 on radio harness). Also, the Transit usually puts out about .5 or .6 volts for the video signal, and some headunits (like pioneer), require at least 1 volt of signal to recognize a video signal. If you are using a pioneer, you may need an RCA video voltage booster.
NOTE for SYNC models: The factory USB ports are on a HUB system, which prevents you to integrate those USB ports to the new aftermarket radio. If you leave those USB port cable connected to the SYNC module, it they still will remain as a full time charge only.
Parts used in this install (Amazon Associate Paid Links):
---Ford Transits WITH factory SYNC system
*Alpine iLX-F511 11" Float Mount Radio: https://amzn.to/3FXKUX0
*Metra 107-FD1B Dash Kit: https://amzn.to/3BEuLTW
*Axxess AXTC-FD3 Wiring Harness Adapter: https://amzn.to/3hvlCGl
*Axxess AXBUCH-FD1 (For Sync Backup Camera): https://amzn.to/3hxlIxc
*Metra 40-EU10: https://amzn.to/2UKAuop
*Panel Tool Kit: https://amzn.to/3C4aUed
---Ford Transits WITH OUT factory SYNC system
*Alpine iLX-F511 11" Float Mount Radio: https://amzn.to/3FXKUX0
*Metra 107-FD1B Double Din Dash Kit: https://amzn.to/3BEuLTW
*Axxess AXTC-FD3): https://amzn.to/3hvlCGl
*Metra 40-EU10: https://amzn.to/2UKAuop
*PAC USB-GM1 USB Adapter (Two Needed): https://amzn.to/3h3HowD
*Panel Tool Kit: https://amzn.to/3C4aUed
Disclosure: As an Amazon Associate I earn from qualifying purchases
If you have any questions, leave a comment below! Be sure to like and subscribe!
2 سال پیش
در تاریخ 1401/10/26 منتشر شده
است.
50,148
بـار بازدید شده