STARTING 3D PRINTING - TRONXY POWERUP AND LEVELING

This is short tutorial describing how we've leveled the bed of low cost 3D Printer (model TronXY ver.P802). In this part printer is powered up for the first time and seem to work. Chapters (movie map): 0:13 3D printer axes overview 0:20 Printer initial mechanical adjustment for Z axe (absolutelly needed before first powerup) 0:50 Bed adjustment summary 1:05 Z axe limit switch adjustment mechanism 1:49 First PowerUP 2:10 Success - printer ready mesg 2:20 Short menu desc (mistake here - menu escape is middle button) 2:40 Axes manual operation test 3:00 X axe driving manual check 3:58 Y axe driving manual check 4:30 Z axe driving manual check 5:00 Bed sticker installation 5:25 Heat bed sticker ready 5:40 Printer main menu overview 6:30 Homing all axes of 3D printer (first time is quite fun - be sure that Z axe is adjusted properly and homing is initiated from Z beeing up) 6:50 Fine bed calibration methodology description while printer is homing 7:35 Fine printer heat bed calibration final check before first printout- x axe moving manually 8:00 Fine printer heat bed calibration check for Y axe (with paper sheet and manually triggered bed movement 8:50 Going up with Z axe 9:10 and final homing ALL AXES before first printing

• #science_technology
• #tronxy
• #p802
• #3d_printing
• #howto
• #tutorial
• #first_powerup
• #bed_leveling