Making a Drag Mat: LEVEL with EASE - cost $160.
32.4 هزار بار بازدید -
2 سال پیش
-
Making a drag mat with
Making a drag mat with the steel costing $160 - It's a fun project and it levels soil and sand with ease.
I got the idea of making this from Connor Ward where he hade a good one which was 10ft wide by 20 inches deep. Check his vid out.
TOP DRESSING drag mat. LAWN LEVELING
Connor's kept flipping at 20inches deep when it hit a mound of sand. So I made mine deeper (30 inches) and it worked well. I haven't had a flip yet.
I also made mine 8ft wide as that suited my needs better.
All up the steel was $160
The welding and labour was free. Many thanks to Uncle Fred and Grumps!
Thanks for watching and I hope this inspires you to make your own drag mat.
Get your lawn on!!!
#levellawn
#dragmat
#getyourlawnon
I got the idea of making this from Connor Ward where he hade a good one which was 10ft wide by 20 inches deep. Check his vid out.
TOP DRESSING drag mat. LAWN LEVELING
Connor's kept flipping at 20inches deep when it hit a mound of sand. So I made mine deeper (30 inches) and it worked well. I haven't had a flip yet.
I also made mine 8ft wide as that suited my needs better.
All up the steel was $160
The welding and labour was free. Many thanks to Uncle Fred and Grumps!
Thanks for watching and I hope this inspires you to make your own drag mat.
Get your lawn on!!!
#levellawn
#dragmat
#getyourlawnon
2 سال پیش
در تاریخ 1401/10/24 منتشر شده
است.
32,427
بـار بازدید شده