Build an RTX 3080 Small Form Factor 4K Gaming PC: Cooler Master NR200P Detailed Tutorial
161.9 هزار بار بازدید -
4 سال پیش
-
In this video we're going
In this video we're going to take a detailed look at building a small form factor 4K gaming PC in the Cooler Master NR200P. This is a fairly detailed, step-by-step tutorial geared at a first time builder, so timestamps are below for your convenience.
Build Components- a 650W SFX PSU and 16GB of 3200mhz DDR4 RAM would also be fine for this build. Idea list here, as an Amazon Associate I earn from qualifying purchases: https://www.amazon.com/shop/machinesm...
Case: Cooler Master NR200P: https://amzn.to/32POSwX
Motherboard: Gigabyte B550I Aorus
CPU: AMD Ryzen 5 5600X: https://amzn.to/2Hb6Pyl
CPU Cooler: Scythe Mugen 5: https://amzn.to/3kCepzQ
GPU: Nvidia RTX 3080 Founders Edition
RAM: Corsair Vengeance RGB 3200mhz: https://amzn.to/2UgeBtD
RGB Fans: Cooler Master Masterfan Halo 120, 3-pack: https://amzn.to/2UPXmQe
Power Supply: Cooler Master V850 SFX Gold: https://amzn.to/339UTod
Storage: Samsung 970 EVO M.2 NVME: https://amzn.to/2USGd8z
A few recommended options for non-RGB:
RAM for SFF builds, Corsair Vengeance LPX: https://amzn.to/3pWKnui
For a fairly economical build I would place the Sickleflow 120s at the bottom under the GPU (if you're using a 2-slot card), and then add any of the following at the top:
Noctua S12A: https://amzn.to/373PAbg
Noctua S12A Chromax: https://amzn.to/2KDMoLV
Be Quiet! Pure Wings 2: https://amzn.to/3pZDIjh
Scythe Kaze Flex 300-1200rpm: https://amzn.to/3pTeSl7
If you're using a thicker card that can only fit slim fans underneath, my only recommendation would be to place the stock fans at the top (depending on your choice of tower cooler- with the demo setup you can have one 25mm fan), then add any of the following under the GPU:
Noctua NF-A12x15: https://amzn.to/39dCvP5
Also in Chromax: https://amzn.to/39idQcx
For the highest end build place the NF-A12x25 Noctuas at the top and bottom (if they fit).
Noctua NF-A12x25: https://amzn.to/39dKJai
0:00 Introduction
1:36 Early Adopters- UPDATE MOBO BIOS!!
2:03 Build List
3:30 Case Prep and Overview
8:36 Motherboard Prep, Cooler Hardware, CPU, M.2 SSD install
14:05 Front I/O Connection
14:58 Motherboard Cables
17:01 ARGB Fan Cables
20:46 Power Supply and cabling
26:16 Fans
30:25 Cooler Install
36:11 RAM Install
36:47 GPU Install
38:46 All done!
Build Components- a 650W SFX PSU and 16GB of 3200mhz DDR4 RAM would also be fine for this build. Idea list here, as an Amazon Associate I earn from qualifying purchases: https://www.amazon.com/shop/machinesm...
Case: Cooler Master NR200P: https://amzn.to/32POSwX
Motherboard: Gigabyte B550I Aorus
CPU: AMD Ryzen 5 5600X: https://amzn.to/2Hb6Pyl
CPU Cooler: Scythe Mugen 5: https://amzn.to/3kCepzQ
GPU: Nvidia RTX 3080 Founders Edition
RAM: Corsair Vengeance RGB 3200mhz: https://amzn.to/2UgeBtD
RGB Fans: Cooler Master Masterfan Halo 120, 3-pack: https://amzn.to/2UPXmQe
Power Supply: Cooler Master V850 SFX Gold: https://amzn.to/339UTod
Storage: Samsung 970 EVO M.2 NVME: https://amzn.to/2USGd8z
A few recommended options for non-RGB:
RAM for SFF builds, Corsair Vengeance LPX: https://amzn.to/3pWKnui
For a fairly economical build I would place the Sickleflow 120s at the bottom under the GPU (if you're using a 2-slot card), and then add any of the following at the top:
Noctua S12A: https://amzn.to/373PAbg
Noctua S12A Chromax: https://amzn.to/2KDMoLV
Be Quiet! Pure Wings 2: https://amzn.to/3pZDIjh
Scythe Kaze Flex 300-1200rpm: https://amzn.to/3pTeSl7
If you're using a thicker card that can only fit slim fans underneath, my only recommendation would be to place the stock fans at the top (depending on your choice of tower cooler- with the demo setup you can have one 25mm fan), then add any of the following under the GPU:
Noctua NF-A12x15: https://amzn.to/39dCvP5
Also in Chromax: https://amzn.to/39idQcx
For the highest end build place the NF-A12x25 Noctuas at the top and bottom (if they fit).
Noctua NF-A12x25: https://amzn.to/39dKJai
0:00 Introduction
1:36 Early Adopters- UPDATE MOBO BIOS!!
2:03 Build List
3:30 Case Prep and Overview
8:36 Motherboard Prep, Cooler Hardware, CPU, M.2 SSD install
14:05 Front I/O Connection
14:58 Motherboard Cables
17:01 ARGB Fan Cables
20:46 Power Supply and cabling
26:16 Fans
30:25 Cooler Install
36:11 RAM Install
36:47 GPU Install
38:46 All done!
4 سال پیش
در تاریخ 1399/09/03 منتشر شده
است.
161,980
بـار بازدید شده