How to use SN Writer to write IMEI to a Mediatek Smartwatch
14.7 هزار بار بازدید -
7 سال پیش
-
Download links & Text format
Download links & Text format @ https://forum.hovatek.com/thread-1773...
This video explains how to use SN Write tool / SN Writer to write IMEI to a Mediatek (MTK) Smartwatch.
Your smartwatch will be unable to detect network or install OTA updates with a Null IMEI
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: https://www.hovatek.com
Facebook: Facebook: hovatek
Twitter: Twitter: hovatek
Google+ : https://plus.google.com/+Hovatek
00:22
In this video tutorial, I'll be explaining how to write IMEI to a Mediatek Smartwatch using SN Write tool or Writer
00:33
Now, I assume you've installed your smartwatch drivers. If you've not installed the Mediatek drivers (smartwatch)
00:40
We have a guide on our Youtube channel & Forum. You might want to check that guide out to install the drivers
00:49
With your drivers installed and the firmware for the smartwatch (you're going to need the DB files), extract
01:01
SN write tool and run SN Writer as administrator. If you're not the admin, you can just run as the normal user
01:22
Under ComPort, you leave that as VCOM. Under Target Type some smartwatches are Feature i.e older chipsets
01:36
while some are the more recent ones. The one I have is the 62xx so that's going to be Feature
01:42
while some are like 6580, those are Smart. Under this dropdown, I'm going to select Feature.
01:58
Under System Config, depending on what you want to write (in my case, just IMEI). You can also write
02:09
Bluetooth address, Barcode, WiFi address and the rest. You just have to tick them here. In my case, its just IMEI
02:16
so I just tick IMEI. My smartwatch has just one IMEI so I don't have to tick Dual IMEI under IMEI Option
02:24
I just leave this blank. Next thing is click MD1_DB. You're going to load the DB file from the firmware you have
02:38
Navigate to the location where you have the smartwatch's firmware. Some might not contain DB files
02:52
so you ave to find the one that contains the BPLGUInfo... file. Select this file then click Open
03:12
That's about all so you click Save at the bottom. Now, we're about ready to writ the IMEI. At this point, you're
03:24
going to need the IMEI of the smartwatch. Click Start. Since I clicked just IMEI, that's the only prompt I'll get
03:33
You're going to enter the IMEI [typing] then click OK. At this point, you power off the smartwatch. Don't hold the
04:15
power button. Make sure the battery is still inside. Connect it to the PC via USB cord. Alright! I have a PASS
04:33
what happened there? [repeating]. It might be that the IMEI I entered was invalid or phone got disconnected.
05:36
That's basically how to write IMEI to a Mediatek smartwatch using SN Writer or SN Write tool
This video explains how to use SN Write tool / SN Writer to write IMEI to a Mediatek (MTK) Smartwatch.
Your smartwatch will be unable to detect network or install OTA updates with a Null IMEI
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: https://www.hovatek.com
Facebook: Facebook: hovatek
Twitter: Twitter: hovatek
Google+ : https://plus.google.com/+Hovatek
00:22
In this video tutorial, I'll be explaining how to write IMEI to a Mediatek Smartwatch using SN Write tool or Writer
00:33
Now, I assume you've installed your smartwatch drivers. If you've not installed the Mediatek drivers (smartwatch)
00:40
We have a guide on our Youtube channel & Forum. You might want to check that guide out to install the drivers
00:49
With your drivers installed and the firmware for the smartwatch (you're going to need the DB files), extract
01:01
SN write tool and run SN Writer as administrator. If you're not the admin, you can just run as the normal user
01:22
Under ComPort, you leave that as VCOM. Under Target Type some smartwatches are Feature i.e older chipsets
01:36
while some are the more recent ones. The one I have is the 62xx so that's going to be Feature
01:42
while some are like 6580, those are Smart. Under this dropdown, I'm going to select Feature.
01:58
Under System Config, depending on what you want to write (in my case, just IMEI). You can also write
02:09
Bluetooth address, Barcode, WiFi address and the rest. You just have to tick them here. In my case, its just IMEI
02:16
so I just tick IMEI. My smartwatch has just one IMEI so I don't have to tick Dual IMEI under IMEI Option
02:24
I just leave this blank. Next thing is click MD1_DB. You're going to load the DB file from the firmware you have
02:38
Navigate to the location where you have the smartwatch's firmware. Some might not contain DB files
02:52
so you ave to find the one that contains the BPLGUInfo... file. Select this file then click Open
03:12
That's about all so you click Save at the bottom. Now, we're about ready to writ the IMEI. At this point, you're
03:24
going to need the IMEI of the smartwatch. Click Start. Since I clicked just IMEI, that's the only prompt I'll get
03:33
You're going to enter the IMEI [typing] then click OK. At this point, you power off the smartwatch. Don't hold the
04:15
power button. Make sure the battery is still inside. Connect it to the PC via USB cord. Alright! I have a PASS
04:33
what happened there? [repeating]. It might be that the IMEI I entered was invalid or phone got disconnected.
05:36
That's basically how to write IMEI to a Mediatek smartwatch using SN Writer or SN Write tool
7 سال پیش
در تاریخ 1396/01/30 منتشر شده
است.
14,734
بـار بازدید شده