GNSS Hi-Target electronic bubble and Tilt Calibration procedure
4.9 هزار بار بازدید -
7 سال پیش
-
In this Tech Talk we
In this Tech Talk we explained the calibration procedure when using the internal tilt sensor and magnetometer in the Hi-Target GNSS receiver. The sensors are utilized for functions in Access such as the eBubble and the corner and tilt points.
you should uploaded latest firmware for V90plus at least 5.1 and latest Hi-Survey Road at least 1.4.1.
It is critical that these sensors are properly and routinely calibrated for the aforementioned functions to work more accuratly.
you should uploaded latest firmware for V90plus at least 5.1 and latest Hi-Survey Road at least 1.4.1.
It is critical that these sensors are properly and routinely calibrated for the aforementioned functions to work more accuratly.
7 سال پیش
در تاریخ 1396/12/22 منتشر شده
است.
4,964
بـار بازدید شده