How to Replace Variable Valve Timing Solenoid 2008-2013 Nissan Rogue

TRQ
TRQ
40.3 هزار بار بازدید - پارسال - Buy Now! New Variable Valve
Buy Now! New Variable Valve Timing Solenoid from 1AAuto.com http://1aau.to/ia/1AZMX00395 This video shows you how to install a variable valve timing solenoid on your 2008-2013 Nissan Rogue. If the variable valve timing solenoid in your vehicle is stuck or clogged, causing your engine to not run properly, you may notice reduced fuel efficiency, sputtering, rough running or stalling in your engine. Solenoids usually need to be replaced once they begin to fail. This process should be similar on the following vehicles: 2008 Nissan Rogue 2009 Nissan Rogue 2010 Nissan Rogue 2011 Nissan Rogue 2012 Nissan Rogue 2013 Nissan Rogue Tools you will need: • Flat Blade Screwdriver http://1aau.to/obfX/1AXAA00013 • Pry Bar http://1aau.to/oQU/1AXAA00020 • 10mm Socket http://1aau.to/oa4F/1AXAA00017 • Gloves http://1aau.to/oVv/1AXSS00048 • Safety Glasses http://1aau.to/oNI/1AXAA00343 Subscribe: https://www.seevid.ir/fa/result?ytch=UCWCdsftsTqYMO7cA_5Sc-yA ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
پارسال در تاریخ 1402/02/12 منتشر شده است.
40,364 بـار بازدید شده
... بیشتر