POD HD500X Patch MIC XLR Vocal Chain Compressor Reverb Delay LINE6
42.8 هزار بار بازدید -
6 سال پیش
-
Hook up a XLR Microphone
Hook up a XLR Microphone to the Line6 POD HD500X! Here's how to make a patch for the POD HD500 guitar pedal and vocal chain using one channel. Use this patch for a great sounding studio style vocal chain XLR Mic for recording lead vocals, acoustic guitar or use it for lead guitar lines.
➤Please Subscribe to my channel!! goo.gl/p1xmZJ
In the SYS/IO settings, change "Input Source 1" to MIC.
This channel patch has a Mic preamp, compressor, delay and reverb for a vocal mic (XLR). The microphone must be a "dynamic" or "Velocity" microphone (Non-phantom powered). The Pod HD500X does not supply phantom power.
One channel has a guitar amp model, Overdrive and reverb.
This patch is perfect for one person gigs, where you don't want to lug around a PA system or even a separate mixer. You can run both outputs to your amp inputs. OR carry a portable PA, without a guitar amp. Either way, you won't have to rely on the sound engineer to add reverb or fx to your vocals.
It's also great for recording singer songwriters who want a great sounding patch including a compressor, and EQ.
I hope you Enjoy! Don't forget to "Like" if this video was helpful! Thank You!
vintagemusictech.blogspot.com/2014/07/using-microp…
For more videos, tips and tricks, check out my site!
6 سال پیش
در تاریخ 1397/11/24 منتشر شده
است.
42,895
بـار بازدید شده