How To Setup Chinese AC Servo Motor 80ST-M02430 - Step/Dir Position and Analog Speed Control Modes
84 هزار بار بازدید -
4 سال پیش
-
I performed some tests on
I performed some tests on a chinese aliexpress 80ST-M02430 2.39Nm 0.75kW 220V (230V) servo motor. It can be used for a CNC axis drive but also for spindle driving by its speed control mode controled by its analog input -/+ 10V. For CNC axis will be used the positioning step/dir mode like the ones in open loop and closed loop stepper motors. I didn't test the dynamics of this servo, but you can check out other videos on youtube where people do much harder tests on it and it performs very well.
I did just some testing here after opening the package so don't stick to it too much - but it just worked as the manufacturer says. For more accurate info check out the manufacturer manual. It can be also controled by modbus communication, but I'm not able to do it at this moment.
Thank you for watching, if you have any questions - leave a comment, maybe i'll be able to help you.
Music: Glacier - Patrick Patrikios
00:00 Presentation of used parts
00:53 Wiring
03:22 Step/Dir setup
06:10 Analog +/- 10V setup
07:10 Outro
Facebook Page 👉 Facebook: GBWMCNC
YouTube Channel 👉👉gbwmweldingmachiningcnc
I did just some testing here after opening the package so don't stick to it too much - but it just worked as the manufacturer says. For more accurate info check out the manufacturer manual. It can be also controled by modbus communication, but I'm not able to do it at this moment.
Thank you for watching, if you have any questions - leave a comment, maybe i'll be able to help you.
Music: Glacier - Patrick Patrikios
00:00 Presentation of used parts
00:53 Wiring
03:22 Step/Dir setup
06:10 Analog +/- 10V setup
07:10 Outro
Facebook Page 👉 Facebook: GBWMCNC
YouTube Channel 👉👉gbwmweldingmachiningcnc
4 سال پیش
در تاریخ 1399/10/10 منتشر شده
است.
84,055
بـار بازدید شده