How to replace the crank sensor on a Jeep, replacement, P Codes P0351, P1391, P1494 - VOTD
268.4 هزار بار بازدید -
11 سال پیش
-
Cam sensor replacement: 30 to
Cam sensor replacement: 30 to 90 minutes.
Replaced the crank sensor on this 2003 Jeep Grand Cherokee. Initially it popped a crank sensor code. The IAC, CAM sensor, and Crank sensor were replaced and it ran good cold but once warmed up it ran real bad, popped more codes and really wouldn't run at all, like the timing was off.
Replaced the crank sensor with a OEM part and all seems well now, after 1 hour of running. Took about 45 minutes to figure out how to change the crank sensor. Should take about 30 minutes.
-------------------------------------------------
Disclaimer: In this video I share what it takes t...
Basic car care YouTube channel: rspiwin
How to search my videos: How to find videos on YouTube, my spe...
Visit my Website for special tools, my wish list and other helpful information: http://www.RobertDIY.com
Support Robert, become a Patron: Patreon: RobertDIYAfterDark
Replaced the crank sensor on this 2003 Jeep Grand Cherokee. Initially it popped a crank sensor code. The IAC, CAM sensor, and Crank sensor were replaced and it ran good cold but once warmed up it ran real bad, popped more codes and really wouldn't run at all, like the timing was off.
Replaced the crank sensor with a OEM part and all seems well now, after 1 hour of running. Took about 45 minutes to figure out how to change the crank sensor. Should take about 30 minutes.
-------------------------------------------------
Disclaimer: In this video I share what it takes t...
Basic car care YouTube channel: rspiwin
How to search my videos: How to find videos on YouTube, my spe...
Visit my Website for special tools, my wish list and other helpful information: http://www.RobertDIY.com
Support Robert, become a Patron: Patreon: RobertDIYAfterDark
11 سال پیش
در تاریخ 1392/02/22 منتشر شده
است.
268,415
بـار بازدید شده