How To Use Grain Fillers - Finishing 101 Series
217.6 هزار بار بازدید -
7 سال پیش
-
To achieve a smooth and
To achieve a smooth and mirror like finish on open grained woods, you should use a grain filler. In this video I show you how to use the grain filler from Aqua Coat.
- Sand the surface to 150 grit using my orbital sander
- Apply a seal coat of dewaxed shellac to two of the 3 sample boards
- Apply stain/dye to the third sample board. When the stain/dye dries, apply a coat of dewaxed shellac.
- Using a plastic spreader, apply a very thin coat of Aqua Coat grain filler, wiping off the excess across the grain. Let it dry for 45 minutes to an hour.
- After the first coat of grain filler dries, sand the surface with 320 grit sandpaper.
- Apply 2 more coats of grain filler the same way as described above and let it dry.
- Apply your top coat of choice.
This video is sponsored by Aqua Coat.
Products used in this video (Affiliate links):
Aqua Coat Clear Grain Filler: http://amzn.to/2x8Yip7
General Finishes Arm-r-seal: http://amzn.to/2gEH4VR
Festool Orbital Sander: http://amzn.to/2vJbGzU
Dewaxed Shellac: http://amzn.to/2wEcEfS
320 Grit Sandpaper: http://amzn.to/2gECzdP
--------------------------------
Help support what I do by buying a SimpleCove t-shirt! http://bit.ly/SCWoodworkingShirt
--------------------------------
Tools I Use (affiliate):
https://www.amazon.com/shop/simplecove
--------------------------------
See more projects like this on my website: http://www.simplecove.com
--------------------------------
Subscribe to my channel: @simplecove
--------------------------------
Follow me on Social Media:
Instagram: Instagram: simplecove
Twitter: Twitter: simplecove
Facebook: Facebook: simplecove
Pinterest: Pinterest: simplecove
--------------------------------
Sean Walker
PO Box 1502
Versailles, KY 40383
- Sand the surface to 150 grit using my orbital sander
- Apply a seal coat of dewaxed shellac to two of the 3 sample boards
- Apply stain/dye to the third sample board. When the stain/dye dries, apply a coat of dewaxed shellac.
- Using a plastic spreader, apply a very thin coat of Aqua Coat grain filler, wiping off the excess across the grain. Let it dry for 45 minutes to an hour.
- After the first coat of grain filler dries, sand the surface with 320 grit sandpaper.
- Apply 2 more coats of grain filler the same way as described above and let it dry.
- Apply your top coat of choice.
This video is sponsored by Aqua Coat.
Products used in this video (Affiliate links):
Aqua Coat Clear Grain Filler: http://amzn.to/2x8Yip7
General Finishes Arm-r-seal: http://amzn.to/2gEH4VR
Festool Orbital Sander: http://amzn.to/2vJbGzU
Dewaxed Shellac: http://amzn.to/2wEcEfS
320 Grit Sandpaper: http://amzn.to/2gECzdP
--------------------------------
Help support what I do by buying a SimpleCove t-shirt! http://bit.ly/SCWoodworkingShirt
--------------------------------
Tools I Use (affiliate):
https://www.amazon.com/shop/simplecove
--------------------------------
See more projects like this on my website: http://www.simplecove.com
--------------------------------
Subscribe to my channel: @simplecove
--------------------------------
Follow me on Social Media:
Instagram: Instagram: simplecove
Twitter: Twitter: simplecove
Facebook: Facebook: simplecove
Pinterest: Pinterest: simplecove
--------------------------------
Sean Walker
PO Box 1502
Versailles, KY 40383
7 سال پیش
در تاریخ 1396/06/15 منتشر شده
است.
217,615
بـار بازدید شده