Making a Wooden Beard Comb with 3018 PRO CNC
10.3 هزار بار بازدید -
4 سال پیش
-
Edit: Giveaway ended. Congratulations to:
Edit: Giveaway ended.
Congratulations to:
ColdWood Cowboy
Enrique Casallas
Mats Andersson
I did quite a few prototypes of this beard comb before I settled on this version, but I am really happy with it. The one seen in the video is made with 5mm thick walnut. I 3D-printed the sanding jig to be able to sand it evenly and it also helps a lot when making more than one comb. I glued to pieces together to give the comb some strength, otherwise it would break easily. I designed it using Fusion 360 and used Easel to carve it on my small cnc (3018 Pro). This comb is an untangling version of a comb, hence the gap between the teeth are a bit bigger.
Get the .svg-file: https://gum.co/VHDPr
or register as a Patreon to get all files and drawings for my projects.
Patreon: theswedishmaker
The CNC I Use: https://bit.ly/3gg6YMu
A Review of the CNC: The 3018 PRO - Is It Worth Buying? - ...
To enter the giveaway:
1. Make sure you are subscribed to the channel
2. Leave a comment down below.
3. The winner will be announced here in a week and contacted through the comment field.
In no way is this giveaway endorsed, associated with, sponsored by, or administered by YouTube or any social media platform it’s promoted on. Disclaimer: This video is not sponsored.
See the community guidelines as established by Youtube. https://www.youtube.com/intl/sv/about...
No personal data will be collected during the giveaway, stored or in any other way distributed to any third party. All communication is made through the comment field of the linked YouTube video.
TOOLS: https://kit.co/TheSwedishMaker/tools-kit
VIDEO KIT: https://kit.co/TheSwedishMaker/video-kit
The music I use is from Epidemic Sound , click this link for a free trial: https://www.epidemicsound.com/referra...
SOCIAL:
Official Rules for Giveaway:
Instagram: Instagram: theswedishmaker
Facebook: Facebook: theswedishmaker
Website: http://theswedishmaker.com
Congratulations to:
ColdWood Cowboy
Enrique Casallas
Mats Andersson
I did quite a few prototypes of this beard comb before I settled on this version, but I am really happy with it. The one seen in the video is made with 5mm thick walnut. I 3D-printed the sanding jig to be able to sand it evenly and it also helps a lot when making more than one comb. I glued to pieces together to give the comb some strength, otherwise it would break easily. I designed it using Fusion 360 and used Easel to carve it on my small cnc (3018 Pro). This comb is an untangling version of a comb, hence the gap between the teeth are a bit bigger.
Get the .svg-file: https://gum.co/VHDPr
or register as a Patreon to get all files and drawings for my projects.
Patreon: theswedishmaker
The CNC I Use: https://bit.ly/3gg6YMu
A Review of the CNC: The 3018 PRO - Is It Worth Buying? - ...
To enter the giveaway:
1. Make sure you are subscribed to the channel
2. Leave a comment down below.
3. The winner will be announced here in a week and contacted through the comment field.
In no way is this giveaway endorsed, associated with, sponsored by, or administered by YouTube or any social media platform it’s promoted on. Disclaimer: This video is not sponsored.
See the community guidelines as established by Youtube. https://www.youtube.com/intl/sv/about...
No personal data will be collected during the giveaway, stored or in any other way distributed to any third party. All communication is made through the comment field of the linked YouTube video.
TOOLS: https://kit.co/TheSwedishMaker/tools-kit
VIDEO KIT: https://kit.co/TheSwedishMaker/video-kit
The music I use is from Epidemic Sound , click this link for a free trial: https://www.epidemicsound.com/referra...
SOCIAL:
Official Rules for Giveaway:
Instagram: Instagram: theswedishmaker
Facebook: Facebook: theswedishmaker
Website: http://theswedishmaker.com
4 سال پیش
در تاریخ 1399/06/27 منتشر شده
است.
10,360
بـار بازدید شده