Building and testing a new water cooling system for Peltier coolers
162.7 هزار بار بازدید -
4 سال پیش
-
In this video, I show
In this video, I show you a new water cooler setup for my Peltier cooler experiments. Previously, I’ve been using a water-cooling kit for PCs. The biggest change is in the radiator. In the new cooling system, I use a radiator which is actually a car part, it is an oil cooler. The fittings are perfect for the hoses I already have so it is easy to match them with any PC water cooling parts (i.e. 8 mm hoses). The surface area/contour is nearly two times larger. The thickness of the unit is the same, however, the older cooler (the dedicated CPU/GPU) cooler has more dense lamellae.
The experiment suggests that this cooler has more potential, but due to the poor airflow, I could not create a significant temperature drop between the inlet and the outlet. The difference was only around 2-3°C. However, the maximum temperature of the water was around 45°C which is very nice if considering the amount of heat pumped into the system.
Please don't forget to subscribe!
Please consider supporting me on Patreon:
Patreon: curiousscientist
If you want to support my work, please consider buying the parts using my affiliate links:
https://curiousscientist.tech/tools
The experiment suggests that this cooler has more potential, but due to the poor airflow, I could not create a significant temperature drop between the inlet and the outlet. The difference was only around 2-3°C. However, the maximum temperature of the water was around 45°C which is very nice if considering the amount of heat pumped into the system.
Please don't forget to subscribe!
Please consider supporting me on Patreon:
Patreon: curiousscientist
If you want to support my work, please consider buying the parts using my affiliate links:
https://curiousscientist.tech/tools
4 سال پیش
در تاریخ 1399/07/13 منتشر شده
است.
162,719
بـار بازدید شده