How to Replace Front Upper Control Arm 2007-14 Chevy Silverado
68.3 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ic/1ASFU00198
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ upper control arm in your 2007-14 Chevy Silverado.
• Check here for more videos on the 2007-2014 Chevy Silverado: Chevy Silverado 2nd Generation 2007-2014
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar http://1aau.to/odX/1AXAA00020
• 18mm Wrench
• 10mm Socket http://1aau.to/omp/1AXAA00017
• 15mm Socket http://1aau.to/ooJ/1AXAA00015
• 19mm Socket http://1aau.to/ogh/1AXAA00043
• 21mm Socket http://1aau.to/ogh/1AXAA00043
• 22mm Socket http://1aau.to/oaM/1AXAA00266
• Locking Pliers http://1aau.to/oaw/1AXAA00139
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/opT/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oiG/1AXAA00044
• Floor Jack http://1aau.to/oed/1AXAA00068
• Hammer http://1aau.to/odT/1AXAA00091
• Jack Stands http://1aau.to/odV/1AXAA00065
• Rubber Mallet http://1aau.to/o7/1AXAA00413
Subscribe: @trq
Check out our playlist:
Chevy Silverado 2nd Generation 2007-2013: Chevy Silverado 2nd Generation 2007-2014
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ic/1ASFU00198
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ upper control arm in your 2007-14 Chevy Silverado.
• Check here for more videos on the 2007-2014 Chevy Silverado: Chevy Silverado 2nd Generation 2007-2014
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Pry Bar http://1aau.to/odX/1AXAA00020
• 18mm Wrench
• 10mm Socket http://1aau.to/omp/1AXAA00017
• 15mm Socket http://1aau.to/ooJ/1AXAA00015
• 19mm Socket http://1aau.to/ogh/1AXAA00043
• 21mm Socket http://1aau.to/ogh/1AXAA00043
• 22mm Socket http://1aau.to/oaM/1AXAA00266
• Locking Pliers http://1aau.to/oaw/1AXAA00139
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/opT/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/oiG/1AXAA00044
• Floor Jack http://1aau.to/oed/1AXAA00068
• Hammer http://1aau.to/odT/1AXAA00091
• Jack Stands http://1aau.to/odV/1AXAA00065
• Rubber Mallet http://1aau.to/o7/1AXAA00413
Subscribe: @trq
Check out our playlist:
Chevy Silverado 2nd Generation 2007-2013: Chevy Silverado 2nd Generation 2007-2014
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/07/20 منتشر شده
است.
68,399
بـار بازدید شده