ICOM IC-7300, AUTOMATIC ANTENNA TUNER MODIFICATION 🤔🤔quick look SIGMA HF 360 ALL BANDS VERTICAL PT/1
14.3 هزار بار بازدید -
3 سال پیش
-
Hi, it's time to change
Hi, it's time to change the Gainmaster 5/8 wave for another vertical ,so I thought I'd try the sigma HF 360 with a 2 radials,one to improve 40 meters and one for 80,but unfortunately I have to wait another week for the radials to arrive, but in the meantime i got the radios antenna tuner modified as you can see it now tunes in from 5 to 1 down instead of 3 to I ,personally find it very useful improvements as he can see on the videos. Thanks for watching. I'll leave the details if anybody's interested and want some more information,thanks for watching 73s from Rotterdam 👍Hallo, het is tijd om de Gainmaster 5/8-golf te veranderen voor een andere verticaal, dus ik dacht dat ik de sigma HF 360 zou proberen met 2 radialen, een om 40 meter te verbeteren en een voor 80, maar helaas moet ik nog een week wachten om de radialen te krijgen, maar in de tussentijd heb ik de antennetuner van de radio aangepast zoals hij kan zien, hij stemt nu af van 5 naar 1 lager in plaats van 3, persoonlijk vind ik het erg nuttige verbeteringen zoals hij op de video's kan zien. Bedankt voor het kijken. Ik laat de details achter als iemand geïnteresseerd is en wat meer informatie wil, bedankt voor het kijken naar 73s from Rotterdam 👍In proefopstelling als GP !!!(zie andere foto's) FOR MORE INFORMATION..WWW.VENHORST.NL
daardoor minder QRM !!!! (van S9++ naar S3)
Let Op wordt nog verder uitgetest.
SE HF-360 VERTICAL
the SE HF-360 VERTICAL, this instruction sheet should help you get the best from your new antenna. The SE HF-360 consists of 3 Fibreglass vertical radiating sections and one stainless steel top whip and an transformer used to lower the high impedances found at the feed point of the vertical to the 50 Ohms that is required by your transceiver. Specifications: -Type End fed vertical antenna -Frequency TX/ 3.5 –52MHz (with ATU) RX/ 1.8 –55MHz (with ATU) -Max power 400 Watts -Impedance 50 Ohms -Connector SO-239 -Height 5.5 metresAssembly and Mounting: -Before you install your antenna, select the most available open site away from power lines and telephone lines. The antenna can be mounted at ground level or at height so giving you many options on installation. -Assemble the fiberglass elements ensuring that the lock washers are used and that the steel whip is inserted into the topsection fully and that the two grub screws are securely fastened. -Mount the antenna using the U-bolt or other attachment. -At the top of the base cradle place the three nuts and bolts into the black moulding and secure. -Attach the PL-259 plug on the 50 Ohm feeder coax to SO-239 socket on the transformer at the base of the antenna. -We recommend that you should always earth at the tuner point rather than at the transformer for best performance and safety. Pack contents: 2x Fiberglass poles. 1x Fiberglass pole with base cradle + transformer attached. 1x 1.35 metre steel whip 2x Lock washers 3x Top moulding nuts and bolts + washers. 2x U-Clamps + washers and nuts. 1x Alan key for top whip. Please note: This antenna is for amateur radio and broadband receiving use. Do not use other than for the purpose of antenna. Please use the antenna within the standard specifications described in this manual. Failure to do this may cause heat and breakdown of the transformer unit.
Warning: High RF currents are present on the antenna when transmitting. DO NOT TOUCH.
SE HF-360 VERTICAL
daardoor minder QRM !!!! (van S9++ naar S3)
Let Op wordt nog verder uitgetest.
SE HF-360 VERTICAL
the SE HF-360 VERTICAL, this instruction sheet should help you get the best from your new antenna. The SE HF-360 consists of 3 Fibreglass vertical radiating sections and one stainless steel top whip and an transformer used to lower the high impedances found at the feed point of the vertical to the 50 Ohms that is required by your transceiver. Specifications: -Type End fed vertical antenna -Frequency TX/ 3.5 –52MHz (with ATU) RX/ 1.8 –55MHz (with ATU) -Max power 400 Watts -Impedance 50 Ohms -Connector SO-239 -Height 5.5 metresAssembly and Mounting: -Before you install your antenna, select the most available open site away from power lines and telephone lines. The antenna can be mounted at ground level or at height so giving you many options on installation. -Assemble the fiberglass elements ensuring that the lock washers are used and that the steel whip is inserted into the topsection fully and that the two grub screws are securely fastened. -Mount the antenna using the U-bolt or other attachment. -At the top of the base cradle place the three nuts and bolts into the black moulding and secure. -Attach the PL-259 plug on the 50 Ohm feeder coax to SO-239 socket on the transformer at the base of the antenna. -We recommend that you should always earth at the tuner point rather than at the transformer for best performance and safety. Pack contents: 2x Fiberglass poles. 1x Fiberglass pole with base cradle + transformer attached. 1x 1.35 metre steel whip 2x Lock washers 3x Top moulding nuts and bolts + washers. 2x U-Clamps + washers and nuts. 1x Alan key for top whip. Please note: This antenna is for amateur radio and broadband receiving use. Do not use other than for the purpose of antenna. Please use the antenna within the standard specifications described in this manual. Failure to do this may cause heat and breakdown of the transformer unit.
Warning: High RF currents are present on the antenna when transmitting. DO NOT TOUCH.
SE HF-360 VERTICAL
3 سال پیش
در تاریخ 1400/09/14 منتشر شده
است.
14,333
بـار بازدید شده