How to Replace Front Wheel Bearings 2006-2012 Ford Fusion
6.7 هزار بار بازدید -
6 ماه پیش
-
Buy Now!New Wheel Bearing from
Buy Now!
New Wheel Bearing from 1AAuto.com http://1aau.to/ib/TKAXX00080
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/TKSHS00717
This video shows you how to install a new wheel bearing on your 2006-2012 Ford Fusion. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pry Bar http://1aau.to/o5M/1AXAA00020
• 21mm wrench
• 15mm Socket http://1aau.to/obXo/1AXAA00015
• 17mm Socket http://1aau.to/obXo/1AXAA00015
• 19mm Socket
• 21mm Deep Socket
• 24mm Socket
• 32mm Socket http://1aau.to/odS/1AAST00003
• 3 Jaw Gear Puller
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/omw/1AXAA00439
• Dead Blow Hammer
• Press
• Channel-Lock Pliers http://1aau.to/oob/1AXAA00139
• Locking Pliers http://1aau.to/oob/1AXAA00139
• Needle nose pliers http://1aau.to/oHZ/1AXAA00051
• Needle nose pliers http://1aau.to/oHZ/1AXAA00052
• Wire Cutters
• T40 Bit
• Ratchet http://1aau.to/obZ6/1AXAA00016
• Socket Extensions http://1aau.to/obXo/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa4I/1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Gloves http://1aau.to/oaQZ/1AXSS00048
• Rust Penetrant
• Safety Glasses
• sanding disc
• 10mm Hex Socket
• Floor Jack http://1aau.to/oarv/1AXAA00068
• Jack Stands http://1aau.to/oadH/1AXAA00065
• Large Hammer
• Pick http://1aau.to/oYU/1AXAA00037
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/owY/1AXAA00079
Subscribe: @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: Ford Fusion 2006-2012 1st Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Wheel Bearing from 1AAuto.com http://1aau.to/ib/TKAXX00080
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/TKSHS00717
This video shows you how to install a new wheel bearing on your 2006-2012 Ford Fusion. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2007 Ford Fusion SEL 3.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2006 Ford Fusion
2007 Ford Fusion
2008 Ford Fusion
2009 Ford Fusion
2010 Ford Fusion
2011 Ford Fusion
2012 Ford Fusion
Tools you will need:
• Pry Bar http://1aau.to/o5M/1AXAA00020
• 21mm wrench
• 15mm Socket http://1aau.to/obXo/1AXAA00015
• 17mm Socket http://1aau.to/obXo/1AXAA00015
• 19mm Socket
• 21mm Deep Socket
• 24mm Socket
• 32mm Socket http://1aau.to/odS/1AAST00003
• 3 Jaw Gear Puller
• Ball Joint Press
• Brake Caliper Hanger http://1aau.to/omw/1AXAA00439
• Dead Blow Hammer
• Press
• Channel-Lock Pliers http://1aau.to/oob/1AXAA00139
• Locking Pliers http://1aau.to/oob/1AXAA00139
• Needle nose pliers http://1aau.to/oHZ/1AXAA00051
• Needle nose pliers http://1aau.to/oHZ/1AXAA00052
• Wire Cutters
• T40 Bit
• Ratchet http://1aau.to/obZ6/1AXAA00016
• Socket Extensions http://1aau.to/obXo/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa4I/1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Gloves http://1aau.to/oaQZ/1AXSS00048
• Rust Penetrant
• Safety Glasses
• sanding disc
• 10mm Hex Socket
• Floor Jack http://1aau.to/oarv/1AXAA00068
• Jack Stands http://1aau.to/oadH/1AXAA00065
• Large Hammer
• Pick http://1aau.to/oYU/1AXAA00037
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/owY/1AXAA00079
Subscribe: @trq
Check out our playlist:
Ford Fusion 2006-2012 1st Generation: Ford Fusion 2006-2012 1st Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
6 ماه پیش
در تاریخ 1402/12/04 منتشر شده
است.
6,705
بـار بازدید شده