PARTS AND TYPES OF SHARE | M B PLOUGH | AGRICULTURAL ENGINEERING | Er. ABHINAB MISHRA
39.6 هزار بار بازدید -
4 سال پیش
-
This video is about different
This video is about different parts and types of share. This is an initiative from Er. Abhinab Mishra , Agril. Engg., (FMPE) for making a learning process easier and understandable. Please Like, Share and Comment and do Subscribe for more such content.
Share
The share is one of the important part of the plough, which penetrates into the soil and makes a horizontal cut below the soil surface. It is a sharp, well polished and pointed component.
The different parts of the share are :
1. Share point : It is the forward end of the cutting edge which actually penetrates into the soil .
2. Cutting edge: It is the front edge of the share which makes horizontal cut in the soil.
3. Wing of share: It is the outer end of the cutting edge of the share. It supports the plough bottom .
4. Gunnel: It is the vertical face of the share which slides along the furrow wall. It takes the side thrust of the soil and supports the plough bottom against the furrow wall.
5. Cleavage edge: It is the edge of the share which forms joint between Mould board and share on the frog.
6. Wing Bearing: It is the level portion of the wing of the share, providing a bearing for the outer corner of the plough bottom.
Link for MB Plough Parts Video:
MB Plough Parts | Agricultural Engine...
Share
The share is one of the important part of the plough, which penetrates into the soil and makes a horizontal cut below the soil surface. It is a sharp, well polished and pointed component.
The different parts of the share are :
1. Share point : It is the forward end of the cutting edge which actually penetrates into the soil .
2. Cutting edge: It is the front edge of the share which makes horizontal cut in the soil.
3. Wing of share: It is the outer end of the cutting edge of the share. It supports the plough bottom .
4. Gunnel: It is the vertical face of the share which slides along the furrow wall. It takes the side thrust of the soil and supports the plough bottom against the furrow wall.
5. Cleavage edge: It is the edge of the share which forms joint between Mould board and share on the frog.
6. Wing Bearing: It is the level portion of the wing of the share, providing a bearing for the outer corner of the plough bottom.
Link for MB Plough Parts Video:
MB Plough Parts | Agricultural Engine...
4 سال پیش
در تاریخ 1399/11/13 منتشر شده
است.
39,662
بـار بازدید شده