Honda Rebel 450 CMX450 Bobber
1 میلیون بار بازدید -
8 سال پیش
-
Check out and follow my
Check out and follow my Instagram and Tiktok pages below!
TikTok: hardboiledcustoms
&
https://www.instagram.com/hardboiledc...
Pulling out the Bobber for a quick spin around the block. This 1986 Honda Rebel 450 was built by my father and I and was inspired by WWII era bikes.
Modification list:
Frame/ Suspension:
- Stock Rear Frame/ Swing Arm Removed. Custom 3" Stretch, 2" Drop Hard Tail With Harley 3/4" Axle Plates.
- Frame Neck Raked To 38* Degrees (Stock Was 32*)
- Solo Seat DIY Weld On Spring Bungs
- Custom Left-to-Right Side Hand Shifter Linkage. Brass Shift Knob made by Brock Schneiderman. (Can be used or can be locked and just for show)
- Detabbed Frame. New Tabs Welded Onto Frame Where Needed.
- Frame Powder Coated Gloss Black (Some small areas have been touched up with spray paint after some welding Tab modifications)
Rims/Tires/ Axles:
- DNA 4" Under Springer. Chrome Front and Gloss Black Rear.
- Harley Softail 40 Spoke 16" x 3" Front Rim Powder Coated Black With New Bearings.
- Harley Softail 40 Spoke 16" x 3" Rear Rim Powder Coated Black With New Bearings.
- Rebel Gears Custom Rear Harley Sprocket for Harley Softail Rim. Geared 3 Teeth Lower Then Stock For Better Highway Cruising and Longer Gears.
- 1989 Harley FLHS Rear Axle.
- DNA Front Axle Kit.
- Firestone ANS 16"x 5.00" Military Tires
- New Chain
Brakes/Cables/Levers/Bars:
- DNA Chrome Harley Big Front Brake Kit
- DNA Chrome Harley Big Rear Brake Kit
- 1973 CB350 Rebuilt Front Brake Reservoir and Lever
- 1973 CB350 Clutch Lever
- Spiegler Performance Custom Front Brake Line
- Venhill Custom DIY Clutch Cable
- Harley Softail 1987-1999 Rear Brake Reservoir and Brake Line.
- Custom Fabricated Forwad Control to Rear Brake Linkage
- Custom Welded and Fabricated Top Triple Tree Handle Bars.
- Emgo Throttle with Jackhammer Grips
- Motion Pro Custom Throttle Cable
Electrical:
- Custom and Wiring Harness.
-6" Tinworks Oil Tank. Powder Coated Gloss Black. Wiring Harness Is Hidden Inside.
- Custom Bar Signal, Hi-Beam, On-Off-Start Buttons and Switches
Misc Parts:
- Cycle Standard Sporty Indented Gas Tank
- Brass Gas cap
- Brass Fuel Gauge sight
- TC Bros XS650 DIY Forward Controls
- LaRosa Rustic Brown Saddlebag
- Mother Road Customs Dark Brown Distressed Leather Seat
- Biltwell Chromoly Seat Post
- 3" chrome solo seat springs
- Custom "Hard Boiled Customs" Battery Box w/ New Battery
- Low Brow Customs 6" Ribbed Sting Ray Fender
- Mini Black Bullet Turn Signals
- No School Choppers Rear 1933 Tail light and Mount
- Powder Coated Tank and Fender Metallic Bonze. Fender is a little faded from cleaning agent.
Engine/Carbs/Exhaust:
- Carbs Rebuilt and Rejeted
- Custom Harley Choke Mount and Cable set up
- Cycle City 2.5" Polished Aluminum Velocity Stacks
- Tan Exhaust Wrap
- TC Bros XS650 DIY Exhaust Kit
- Emgo Cocktail Shaker Mufflers
TikTok: hardboiledcustoms
&
https://www.instagram.com/hardboiledc...
Pulling out the Bobber for a quick spin around the block. This 1986 Honda Rebel 450 was built by my father and I and was inspired by WWII era bikes.
Modification list:
Frame/ Suspension:
- Stock Rear Frame/ Swing Arm Removed. Custom 3" Stretch, 2" Drop Hard Tail With Harley 3/4" Axle Plates.
- Frame Neck Raked To 38* Degrees (Stock Was 32*)
- Solo Seat DIY Weld On Spring Bungs
- Custom Left-to-Right Side Hand Shifter Linkage. Brass Shift Knob made by Brock Schneiderman. (Can be used or can be locked and just for show)
- Detabbed Frame. New Tabs Welded Onto Frame Where Needed.
- Frame Powder Coated Gloss Black (Some small areas have been touched up with spray paint after some welding Tab modifications)
Rims/Tires/ Axles:
- DNA 4" Under Springer. Chrome Front and Gloss Black Rear.
- Harley Softail 40 Spoke 16" x 3" Front Rim Powder Coated Black With New Bearings.
- Harley Softail 40 Spoke 16" x 3" Rear Rim Powder Coated Black With New Bearings.
- Rebel Gears Custom Rear Harley Sprocket for Harley Softail Rim. Geared 3 Teeth Lower Then Stock For Better Highway Cruising and Longer Gears.
- 1989 Harley FLHS Rear Axle.
- DNA Front Axle Kit.
- Firestone ANS 16"x 5.00" Military Tires
- New Chain
Brakes/Cables/Levers/Bars:
- DNA Chrome Harley Big Front Brake Kit
- DNA Chrome Harley Big Rear Brake Kit
- 1973 CB350 Rebuilt Front Brake Reservoir and Lever
- 1973 CB350 Clutch Lever
- Spiegler Performance Custom Front Brake Line
- Venhill Custom DIY Clutch Cable
- Harley Softail 1987-1999 Rear Brake Reservoir and Brake Line.
- Custom Fabricated Forwad Control to Rear Brake Linkage
- Custom Welded and Fabricated Top Triple Tree Handle Bars.
- Emgo Throttle with Jackhammer Grips
- Motion Pro Custom Throttle Cable
Electrical:
- Custom and Wiring Harness.
-6" Tinworks Oil Tank. Powder Coated Gloss Black. Wiring Harness Is Hidden Inside.
- Custom Bar Signal, Hi-Beam, On-Off-Start Buttons and Switches
Misc Parts:
- Cycle Standard Sporty Indented Gas Tank
- Brass Gas cap
- Brass Fuel Gauge sight
- TC Bros XS650 DIY Forward Controls
- LaRosa Rustic Brown Saddlebag
- Mother Road Customs Dark Brown Distressed Leather Seat
- Biltwell Chromoly Seat Post
- 3" chrome solo seat springs
- Custom "Hard Boiled Customs" Battery Box w/ New Battery
- Low Brow Customs 6" Ribbed Sting Ray Fender
- Mini Black Bullet Turn Signals
- No School Choppers Rear 1933 Tail light and Mount
- Powder Coated Tank and Fender Metallic Bonze. Fender is a little faded from cleaning agent.
Engine/Carbs/Exhaust:
- Carbs Rebuilt and Rejeted
- Custom Harley Choke Mount and Cable set up
- Cycle City 2.5" Polished Aluminum Velocity Stacks
- Tan Exhaust Wrap
- TC Bros XS650 DIY Exhaust Kit
- Emgo Cocktail Shaker Mufflers
8 سال پیش
در تاریخ 1395/12/15 منتشر شده
است.
1,059,631
بـار بازدید شده