Roughing 17-4 PH Stainless on a 40-taper Machine? No Problem - DAPRA Mini-Feed Gets It Done!
15.9 هزار بار بازدید -
4 سال پیش
-
2-minute success story from DAPRA
2-minute success story from DAPRA
Extensive high feed roughing of 17-4 PH on a 40-taper Haas machining center. Dapra's mini-feed 2" diameter cutter was used with great success, running at:
325 SFM (620 RPM)
.020" FPT (90 IPM)
.025" DOC
Tool life of over 90 minutes was achieved, with machine loads well within normal. Our Applications Manager worked with our customer to get the correct insert grade & geometry selected, and speeds & feeds dialed-in.
Dapra is an American-made indexable carbide milling tool provider to USA shops. We also provide industry-leading high-pressure machining vises and 5-axis milling solutions.
Learn more at www.dapra.com
4 سال پیش
در تاریخ 1399/09/25 منتشر شده
است.
15,935
بـار بازدید شده