100% infill vs max number of walls (or perimeters or shells) - which is stronger for solid object?

In this video I want to find out, if I need a solid 3D printed object, which method will result a stronger object: 100% infill or maximum number of walls (or perimeters or shells)? In experiment I used Gembird PLA (printing temperatures: 215/60°C) If you like my work, you could support me: https://www.patreon.com/mytechfun https://www.buymeacoffee.com/mytechfun https://www.mytechfun.com/donation (PayPal link) Results can be downloaded from: https://www.mytechfun.com/video/124 Mentioned in video Infill vs Shell test from CNC Kitchen: https://www.seevid.ir/fa/w/AmEaNAwFSfI Contents: https://www.seevid.ir/fa/w/6S1qt2wiuIw Introduction https://www.seevid.ir/fa/w/6S1qt2wiuIw Slicer https://www.seevid.ir/fa/w/6S1qt2wiuIw 3D printing https://www.seevid.ir/fa/w/6S1qt2wiuIw Weight test https://www.seevid.ir/fa/w/6S1qt2wiuIw Tensile test https://www.seevid.ir/fa/w/6S1qt2wiuIw Hook test https://www.seevid.ir/fa/w/6S1qt2wiuIw Bending test https://www.seevid.ir/fa/w/6S1qt2wiuIw Twist test https://www.seevid.ir/fa/w/6S1qt2wiuIw Impact test https://www.seevid.ir/fa/w/6S1qt2wiuIw Results https://www.seevid.ir/fa/w/6S1qt2wiuIw Conclusions #3dprinting #materialtest

• #science_technology
• #3d_printing
• #material_test
• #pla_filament