How to Replace Front Driver Side Lower Ball Joint 2007-2011 Toyota Camry
3.2 هزار بار بازدید -
7 ماه پیش
-
Buy Now!New Ball Joint from
Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ic/1ASBJ00331
This video shows you how to install new, quality TRQ ball joints on your 2007-2011 Toyota Camry. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• 17mm Wrench http://1aau.to/o5v/1AXAA00010
• 18mm Wrench
• 21mm wrench
• 17mm Socket http://1aau.to/obNi/1AXAA00015
• 18mm Socket http://1aau.to/oatI/1AXAA00043
• 19mm Socket http://1aau.to/oatI/1AXAA00043
• 21mm Socket http://1aau.to/oatI/1AXAA00043
• 1/2 Inch Ratchet http://1aau.to/oatI/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/obrI/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obNi/1AXAA00015
• Torque Wrench http://1aau.to/oaVg/1AXAA00044
• Gloves http://1aau.to/oaBn/1AXSS00048
• Safety Glasses
• 6mm Allen Wrench http://1aau.to/oc6/1AXAA00007
• Floor Jack http://1aau.to/oajn/1AXAA00068
• Jack Stands http://1aau.to/o7y/1AXAA00065
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Ball Joint from 1AAuto.com http://1aau.to/ic/1ASBJ00331
This video shows you how to install new, quality TRQ ball joints on your 2007-2011 Toyota Camry. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• 17mm Wrench http://1aau.to/o5v/1AXAA00010
• 18mm Wrench
• 21mm wrench
• 17mm Socket http://1aau.to/obNi/1AXAA00015
• 18mm Socket http://1aau.to/oatI/1AXAA00043
• 19mm Socket http://1aau.to/oatI/1AXAA00043
• 21mm Socket http://1aau.to/oatI/1AXAA00043
• 1/2 Inch Ratchet http://1aau.to/oatI/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/obrI/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obNi/1AXAA00015
• Torque Wrench http://1aau.to/oaVg/1AXAA00044
• Gloves http://1aau.to/oaBn/1AXSS00048
• Safety Glasses
• 6mm Allen Wrench http://1aau.to/oc6/1AXAA00007
• Floor Jack http://1aau.to/oajn/1AXAA00068
• Jack Stands http://1aau.to/o7y/1AXAA00065
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
7 ماه پیش
در تاریخ 1402/09/23 منتشر شده
است.
3,232
بـار بازدید شده