Setting Labelling Machine (Setup Guide In The Description)
13.2 هزار بار بازدید -
-
Current labelling machinery stock page:
Current labelling machinery stock page: http://www.sc-packaging.com/scpackagi...
Setting Up Automatic Labelling Machine Self-adhesive
http://www.sc-packaging.com/scpackagi...
1. Select the container to label together with the relevant labels rolls.
Place a container on the conveyor.
2. Datum
For front and back labelling the center line of the product on the conveyor is the datum.
For wraparound labelling the wraparound unit is the datum to work from set the dispensing edge and guide rails to this point
Set guide rails to this point.
3. Set the label on the container at the correct height using vertical adjustment on application head. Adjust the label head so that the dispensing edge is close to the container as it passes 0.25mm minimum gap. The container must not contact the web of the labels this can cause ripping and label application problems.
Once the labelling machine is adjusted no to set the label settings
Label over hang (the mount of label showing over the edge of the dispensing edge)
Label application delay (the time from the product center to the label being applied)
Note the bottle should be guided but not held back by the guide rails
This is a general setup guide to automatic labelling machines there are more specific instructions for: side labelling, front and back labelling, wraparound, top and bottom, C labelling and tapered containers.
Maintenance
Daily
The machine should be kept clean, and free from labels and spilled products
Check web rollers and label dispensing beak are free from adhesive build up and clean
Check that product detection optics are clear and clean
Ensure all screw threads and slides are kept lightly lubricated and clean (do not us silicon lubricants)
Monthly
Check the product conveyor belt for signs of wear
Check drive belts for tension sign wear.
S.C.Packaging Technology
www.sc-packaging.com
Setting Up Automatic Labelling Machine Self-adhesive
http://www.sc-packaging.com/scpackagi...
1. Select the container to label together with the relevant labels rolls.
Place a container on the conveyor.
2. Datum
For front and back labelling the center line of the product on the conveyor is the datum.
For wraparound labelling the wraparound unit is the datum to work from set the dispensing edge and guide rails to this point
Set guide rails to this point.
3. Set the label on the container at the correct height using vertical adjustment on application head. Adjust the label head so that the dispensing edge is close to the container as it passes 0.25mm minimum gap. The container must not contact the web of the labels this can cause ripping and label application problems.
Once the labelling machine is adjusted no to set the label settings
Label over hang (the mount of label showing over the edge of the dispensing edge)
Label application delay (the time from the product center to the label being applied)
Note the bottle should be guided but not held back by the guide rails
This is a general setup guide to automatic labelling machines there are more specific instructions for: side labelling, front and back labelling, wraparound, top and bottom, C labelling and tapered containers.
Maintenance
Daily
The machine should be kept clean, and free from labels and spilled products
Check web rollers and label dispensing beak are free from adhesive build up and clean
Check that product detection optics are clear and clean
Ensure all screw threads and slides are kept lightly lubricated and clean (do not us silicon lubricants)
Monthly
Check the product conveyor belt for signs of wear
Check drive belts for tension sign wear.
S.C.Packaging Technology
www.sc-packaging.com
55 سال پیش
در تاریخ 1403/05/17 منتشر شده
است.
13,201
بـار بازدید شده