Making Compression Springs
53.8 هزار بار بازدید -
6 سال پیش
-
I was having trouble finding
I was having trouble finding springs to use in a product I'm making that were to my liking so I decided to make them myself. Here is how I turned my own springs in my shop using a mini lathe.
I already owned the lathe and I made the mandrel from some scrap rod I had laying around. I also used a plastic rod (more scrap I had) with a hole drilled through it to guide my wire while winding the springs. I used spring steel music wire to make the springs. These turned out great and although they aren't very precise, extreme precision isn't required in the application these will be used in.
I hope this video is useful to someone else. If you found this video entertaining or informative please consider subscribing to my channel. Likes and comments/feedback are always appreciated too!
All of my links (my store/social media/email information) are here: https://linkpop.com/5286af
I already owned the lathe and I made the mandrel from some scrap rod I had laying around. I also used a plastic rod (more scrap I had) with a hole drilled through it to guide my wire while winding the springs. I used spring steel music wire to make the springs. These turned out great and although they aren't very precise, extreme precision isn't required in the application these will be used in.
I hope this video is useful to someone else. If you found this video entertaining or informative please consider subscribing to my channel. Likes and comments/feedback are always appreciated too!
All of my links (my store/social media/email information) are here: https://linkpop.com/5286af
6 سال پیش
در تاریخ 1397/01/14 منتشر شده
است.
53,827
بـار بازدید شده