DIY Jewelry Organizer
8.2 هزار بار بازدید -
7 سال پیش
-
This beautiful organizer will not
This beautiful organizer will not only provide great organization for your necklaces, earrings, rings, bracelets, and perfumes but it will also be a nice accent on your wall. It is a simple build with not a lot of materials. Please see material list and cut list below.
Music by https://www.bensound.com
The jewelry organizer that inspired me from Amazon: http://amzn.to/2ApyvKO
Materials List:
- 1 x 4 board 10 ft long
- 3/4" dowel 2 ft long
- 16 - 7/8" cup screws - http://amzn.to/2zw6iC3
- 1/4" wire galvanized steel 21"x15" - http://amzn.to/2iIvpHy
- chalkboard or other backing board 21"x15"
- 6 - 1 5/8" wood screws
- 8 - 1 1/4" Kreg screws - http://amzn.to/2iHhdhS
- 3/4" staples
- 2 - D-ring hooks - http://amzn.to/2zvsUTb
- Minwax Stain Dark Walnut 2716 - http://amzn.to/2BfLHPQ
Cut List:
- Top and bottom board will be 2 ft long with 45 degree cuts on both side.
- Side boards will be 1 1/2 ft long with a 45 degree cut on both sides.
- Dowel is 2 ft 1 in.
- Shelf is 2 ft long and 2 1/2 in deep
- Triangle supports are cut to fit so you will need to measure yours when you get to this step.
- Chalkboard and Steel are 21"x15"
I am not an expert, just a regular woodworker, sharing my experiences with you. This is meant for entertainment purposes only.
- Michelle
Music by https://www.bensound.com
The jewelry organizer that inspired me from Amazon: http://amzn.to/2ApyvKO
Materials List:
- 1 x 4 board 10 ft long
- 3/4" dowel 2 ft long
- 16 - 7/8" cup screws - http://amzn.to/2zw6iC3
- 1/4" wire galvanized steel 21"x15" - http://amzn.to/2iIvpHy
- chalkboard or other backing board 21"x15"
- 6 - 1 5/8" wood screws
- 8 - 1 1/4" Kreg screws - http://amzn.to/2iHhdhS
- 3/4" staples
- 2 - D-ring hooks - http://amzn.to/2zvsUTb
- Minwax Stain Dark Walnut 2716 - http://amzn.to/2BfLHPQ
Cut List:
- Top and bottom board will be 2 ft long with 45 degree cuts on both side.
- Side boards will be 1 1/2 ft long with a 45 degree cut on both sides.
- Dowel is 2 ft 1 in.
- Shelf is 2 ft long and 2 1/2 in deep
- Triangle supports are cut to fit so you will need to measure yours when you get to this step.
- Chalkboard and Steel are 21"x15"
I am not an expert, just a regular woodworker, sharing my experiences with you. This is meant for entertainment purposes only.
- Michelle
7 سال پیش
در تاریخ 1396/09/03 منتشر شده
است.
8,205
بـار بازدید شده