How To Tram / Square The Router On BobsCNC CNC Router, CNC Router For Beginners
8.3 هزار بار بازدید -
4 سال پیش
-
An alternative method to check
An alternative method to check the level...Use a digital level to check the bed, then put the level against the router body or router bit
As a new owner of a BobsCNC evolution 3 & evolution 4 (EVO3 & EVO4) router, you will need to make sure the router head is square (trammed) to the work surface. Tram is a term that. for all intents and purposes, means the same thing here.
Without doing this, your machine will leave uneven cuts that you will have to sand out, making more work than is necessary.
As a new owner of a CNC machine, you will also need some tools. Below is a list of good starter tools at reasonable prices with links to save you search time.
TIMESTAMPS
Tools needed - 2:15
Checking the square of your router - 6:55
Tram front to back - 9:27
Setting the belt tension - 19:27
Tram left to right - 21:50
BITS & TOOLS YOU MUST HAVE: Best CNC Router Bits & Tools For Begi...
CNC FOR BEGINNERS playlist: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
Support what I do to help you become an expert CNC'er and marketer of your amazing creations: https://www.paypal.me/garrettfromme
Join the CNC Entrepreneurs private Facebook group (router, laser, plasma, 3D printing, etc): Facebook: cncentrepreneurs
Get the list 'WORDS YOU CAN MAKE ON YOUR CNC THAT SELL':
https://idcwoodcraft.com/cnc-lp-1/?t=...
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
Learn how to start an online business from scratch: https://bit.ly/2ZUEIKK
BEGINNER CNC *MUST HAVE* BITS AND TOOLS
BEST STARTER BITS THAT DO NOT COST A LOT
→ 1-1/8" facing bit: https://amzn.to/2HmV7kg
→ Well rounded set w/ down bits: https://amzn.to/2UNQcvT
→ 90-degree V-bit & ball nose set: https://amzn.to/3lThs7X
→ 60-degree V-bit: https://amzn.to/3pTbUg6
OTHER THINGS YOU'LL NEED
→ Calipers. For the price, it is a very good set: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
BETTER BITS
→ Whiteside 1/8" down bit: https://amzn.to/3kTVPmW
→ Whiteside 1/4" down bit: https://amzn.to/336S6fy
→ Whiteside 60-degree V-bit: https://amzn.to/395kv9C
→ Whiteside 90-degree V-bit: https://amzn.to/336dEci
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]
How you can support me in creating these videos
→ LIKE the video
→ COMMENT about the video
→ DONATE: https://www.paypal.me/garrettfromme
→ PURCHASE through links I provide in these descriptions. I receive affiliate commissions and the cost is the same to you.
#cnc4beginners #cncentrepreneurs #idcwoodcraft #cncforbeginners #bobscnc
e3 e4
As a new owner of a BobsCNC evolution 3 & evolution 4 (EVO3 & EVO4) router, you will need to make sure the router head is square (trammed) to the work surface. Tram is a term that. for all intents and purposes, means the same thing here.
Without doing this, your machine will leave uneven cuts that you will have to sand out, making more work than is necessary.
As a new owner of a CNC machine, you will also need some tools. Below is a list of good starter tools at reasonable prices with links to save you search time.
TIMESTAMPS
Tools needed - 2:15
Checking the square of your router - 6:55
Tram front to back - 9:27
Setting the belt tension - 19:27
Tram left to right - 21:50
BITS & TOOLS YOU MUST HAVE: Best CNC Router Bits & Tools For Begi...
CNC FOR BEGINNERS playlist: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
Support what I do to help you become an expert CNC'er and marketer of your amazing creations: https://www.paypal.me/garrettfromme
Join the CNC Entrepreneurs private Facebook group (router, laser, plasma, 3D printing, etc): Facebook: cncentrepreneurs
Get the list 'WORDS YOU CAN MAKE ON YOUR CNC THAT SELL':
https://idcwoodcraft.com/cnc-lp-1/?t=...
Cool vector files for CNC router & CNC laser: https://etsy.me/3oxX79l
Learn how to start an online business from scratch: https://bit.ly/2ZUEIKK
BEGINNER CNC *MUST HAVE* BITS AND TOOLS
BEST STARTER BITS THAT DO NOT COST A LOT
→ 1-1/8" facing bit: https://amzn.to/2HmV7kg
→ Well rounded set w/ down bits: https://amzn.to/2UNQcvT
→ 90-degree V-bit & ball nose set: https://amzn.to/3lThs7X
→ 60-degree V-bit: https://amzn.to/3pTbUg6
OTHER THINGS YOU'LL NEED
→ Calipers. For the price, it is a very good set: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
BETTER BITS
→ Whiteside 1/8" down bit: https://amzn.to/3kTVPmW
→ Whiteside 1/4" down bit: https://amzn.to/336S6fy
→ Whiteside 60-degree V-bit: https://amzn.to/395kv9C
→ Whiteside 90-degree V-bit: https://amzn.to/336dEci
Facebook: https://fb.me/IDCWoodcraft
Website: www.idcwoodcraft.com
Email: [email protected]
How you can support me in creating these videos
→ LIKE the video
→ COMMENT about the video
→ DONATE: https://www.paypal.me/garrettfromme
→ PURCHASE through links I provide in these descriptions. I receive affiliate commissions and the cost is the same to you.
#cnc4beginners #cncentrepreneurs #idcwoodcraft #cncforbeginners #bobscnc
e3 e4
4 سال پیش
در تاریخ 1399/10/24 منتشر شده
است.
8,337
بـار بازدید شده