Fix Intel Wireless AC 9461 Not Working Error Code 43/10,Fix Connections Problem Intel Wireless 9461
98.4 هزار بار بازدید -
2 سال پیش
-
Fix Intel Dual Band Wireless-AC
Fix Intel Dual Band Wireless-AC 9461 stopped working Error Code 10 and 43 On Windows 10/11, Fix Intel Wireless AC 9461 Not Working after Windows 10/11 update, Fix Connection issue with Intel Wireless AC 9461,Fix Intel Wireless AC 9461 Not Working Error Code 10/43
Step 1) Perform Power cycle- Shut down your computer, turn off WIFI router, wait for few seconds and restart your WIFI router and your computer
Step 2) Make sure WIFI is on in system BIOS- start your PC and immediately tap BIOS key (Such as F2)
Step 3) Run Network Troubleshooter
Step 4) Run these commands
ipconfig/flushdns
ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
Step 5) Disable and enable Intel AC 9461 adapter
Step 6) Start WLAN AutoConfig service
Step 7) Perform network reset (Make sure you have the WIFI password)
Step 8) Reinstall Intel AC 9461 driver (Make sure you have the WIFI password)
Step 9) Set Wireless Adapter Settings to Maximum Performance
Step 10) Install Wireless driver from your system manufacturer website, connect Ethernet cable and go online, in case you don’t have Ethernet cable or computer does not have an Ethernet port then use another computer with internet access and download the wireless driver to the USB flash drive/hard drive and use the USB flash drive/hard drive to install the wireless driver to the faulty computer.
Step 11) Update system BIOS- Use Ethernet cable or download BIOS file (On another PC) to external storage device and then install it
Step 12) Reset your PC (Reset may result in data loss so create a backup before the reset)
Step 1) Perform Power cycle- Shut down your computer, turn off WIFI router, wait for few seconds and restart your WIFI router and your computer
Step 2) Make sure WIFI is on in system BIOS- start your PC and immediately tap BIOS key (Such as F2)
Step 3) Run Network Troubleshooter
Step 4) Run these commands
ipconfig/flushdns
ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
Step 5) Disable and enable Intel AC 9461 adapter
Step 6) Start WLAN AutoConfig service
Step 7) Perform network reset (Make sure you have the WIFI password)
Step 8) Reinstall Intel AC 9461 driver (Make sure you have the WIFI password)
Step 9) Set Wireless Adapter Settings to Maximum Performance
Step 10) Install Wireless driver from your system manufacturer website, connect Ethernet cable and go online, in case you don’t have Ethernet cable or computer does not have an Ethernet port then use another computer with internet access and download the wireless driver to the USB flash drive/hard drive and use the USB flash drive/hard drive to install the wireless driver to the faulty computer.
Step 11) Update system BIOS- Use Ethernet cable or download BIOS file (On another PC) to external storage device and then install it
Step 12) Reset your PC (Reset may result in data loss so create a backup before the reset)
- #science_technology
- #fix_wifi_not_working_with_intel_ac_9461_adapter
- #fix_intel_wireless_ac_9461_keeps_disconnecting
- #fix_intel_wireless_ac_9461_problems_windows_1011
- #fix_problem_with_intel_wireless_ac_9461_not_working
- #fix_intel_wireless_ac_9461_not_working_network_adapter
- #troubleshooting_wireless_network_problems_with_intel_ac_9461_adapter
- #dell_pc_9461_issues_with_intel_wireless_ac_9461_card
- #fix_intel_wireless_ac_9461_not_working_error_code_1043
2 سال پیش
در تاریخ 1401/03/10 منتشر شده
است.
98,405
بـار بازدید شده