How to Replace Front CV Axle 1996-2002 Toyota 4Runner
19.6 هزار بار بازدید -
پارسال
-
Buy Now!New CV Axle Assembly
Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ia/1AACV00217
This video shows you how to install a front CV axle on your 1996-2002 Toyota 4Runner. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar http://1aau.to/oNZ/1AXAA00020
• 14mm Socket http://1aau.to/obhX/1AXAA00015
• 21mm Socket http://1aau.to/o96/1AXAA00043
• 36mm Socket http://1aau.to/obS/1AAST00006
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/oqg/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oav3/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oPx/1AXSS00048
• Safety Glasses http://1aau.to/oHR/1AXAA00343
• Drain Pan http://1aau.to/owK/1AXAA00320
• Floor Jack http://1aau.to/oWF/1AXAA00068
• Rubber Mallet http://1aau.to/ogc/1AXAA00413
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New CV Axle Assembly from 1AAuto.com http://1aau.to/ia/1AACV00217
This video shows you how to install a front CV axle on your 1996-2002 Toyota 4Runner. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar http://1aau.to/oNZ/1AXAA00020
• 14mm Socket http://1aau.to/obhX/1AXAA00015
• 21mm Socket http://1aau.to/o96/1AXAA00043
• 36mm Socket http://1aau.to/obS/1AAST00006
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/oqg/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oav3/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oPx/1AXSS00048
• Safety Glasses http://1aau.to/oHR/1AXAA00343
• Drain Pan http://1aau.to/owK/1AXAA00320
• Floor Jack http://1aau.to/oWF/1AXAA00068
• Rubber Mallet http://1aau.to/ogc/1AXAA00413
• Wheel Chocks
Subscribe: @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
پارسال
در تاریخ 1402/01/08 منتشر شده
است.
19,681
بـار بازدید شده