How I Planked and Glued up the Hull Sides

This video is showing the method that I used to plank the hull sides on this boat.

The original plans specify that the hull sides should be 9mm ply, instead of this I have used a combination of 3mm ply to form a base and 5mm Sapele planking over the top. By having a top layer of 5mm it gave me enough material so that the hull sides could be faired afterwards, it also meant that I could plug the planks to look more like a traditional hull.

You can find me at all the places below for more info.

- Website -
https://danleeboatbuilding.co.uk

- Facebook -
Facebook: danleeboatbuilding

- Instagram -
Instagram: danleeboatbuilding

• #autos_vehicles
• #boat_hull_planking
• #cold_moulding
• #boat_building
• #how_i_planked_and_glued_up_the_hull_sides
• #mahogany_planking
• #planking_boat_sides
• #hull_side_planking