How To Receive Multiple Sensor Readings From Your ARDUINO Into Your MIT APP INVENTOR 2 APP
213.1 هزار بار بازدید -
8 سال پیش
-
The following tutorial will show
The following tutorial will show you how to receive multiple sensor readings from your arduino board into you MIT APP INVENTOR 2 APP.
If you are using more than one sensor with your Arduino project you have found that it is necessary to send that data and display it on your app. To do this you will need to send all the sensors data at one time, then split it apart and display it in the appropriate fields in your MIT APP INVENTOR 2 APP. THIS IS HOW YOU DO IT!!!!!!
In this tutorial we will be using a DHT-11 (DHT11) temperature and humidity sensor and a Photo resistor to send 3 different readings to the mit app inventor app. A DHT-22 (DHT-22) temp and humidity sensor can also be used and it is more accurate than the THD11.
Projects Website: http://thezhut.com/?page_id=395
Check us out on Facebook: Facebook: zarduino
If you are using more than one sensor with your Arduino project you have found that it is necessary to send that data and display it on your app. To do this you will need to send all the sensors data at one time, then split it apart and display it in the appropriate fields in your MIT APP INVENTOR 2 APP. THIS IS HOW YOU DO IT!!!!!!
In this tutorial we will be using a DHT-11 (DHT11) temperature and humidity sensor and a Photo resistor to send 3 different readings to the mit app inventor app. A DHT-22 (DHT-22) temp and humidity sensor can also be used and it is more accurate than the THD11.
Projects Website: http://thezhut.com/?page_id=395
Check us out on Facebook: Facebook: zarduino
8 سال پیش
در تاریخ 1395/09/21 منتشر شده
است.
213,181
بـار بازدید شده