Honda K-Swap Ferrari - Ep. 29 - Intercooler Heat Exchanger Mounted, Sheet Metal Fabrication
38.1 هزار بار بازدید -
3 سال پیش
-
Want to support the channel
Want to support the channel and the builds?
Patreon: StanceWorks
In this episode, I've gotten the heat exchanger for the water to air intercooler system mounted up against the CSF radiator. I followed that up with some sheet metal fabrication, some more successful than others.
I got a new Rivnut Tool, which is fantastic. If you're looking for the one I bought, it's here (although the price jumped $40 since earlier today)
https://www.amazon.com/Astro-Pneumati...
StanceWorks 2021 Content Sponsors:
H&R Springs
RS Future
Nitto Tire
CSF Radiators
Be sure to follow StanceWorks on Instagram: @StanceWorks
Follow me personally on Instagram at @mike_stanceworks
Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com
Last but not least, check out the rest of the gang that helps to make this project happen:
www.rsfuture.com
www.garrettmotion.com
www.turbosmart.com
Timecodes:
00:00 - Intro
01:10 - Mounting the Heat Exchanger Vertically
02:07 - Why Vertical Won't Work
03:03 - Mounting the Heat Exchanger at an Angle
04:25 - Installation: Complete
05:44 - Building an Aluminum Brace
08:38 - My New Favorite Tool... A Pneumatic Rivnut Tool!
11:27 - Sheet Metal Work
15:11 - Starting Over... on a New Piece
16:43 - Rear Cover: Complete
17:12 - Outro
Patreon: StanceWorks
In this episode, I've gotten the heat exchanger for the water to air intercooler system mounted up against the CSF radiator. I followed that up with some sheet metal fabrication, some more successful than others.
I got a new Rivnut Tool, which is fantastic. If you're looking for the one I bought, it's here (although the price jumped $40 since earlier today)
https://www.amazon.com/Astro-Pneumati...
StanceWorks 2021 Content Sponsors:
H&R Springs
RS Future
Nitto Tire
CSF Radiators
Be sure to follow StanceWorks on Instagram: @StanceWorks
Follow me personally on Instagram at @mike_stanceworks
Be sure to support our friends at H&R Springs for helping bring this Honda-swapped Ferrari project to life:
www.hrsprings.com
Last but not least, check out the rest of the gang that helps to make this project happen:
www.rsfuture.com
www.garrettmotion.com
www.turbosmart.com
Timecodes:
00:00 - Intro
01:10 - Mounting the Heat Exchanger Vertically
02:07 - Why Vertical Won't Work
03:03 - Mounting the Heat Exchanger at an Angle
04:25 - Installation: Complete
05:44 - Building an Aluminum Brace
08:38 - My New Favorite Tool... A Pneumatic Rivnut Tool!
11:27 - Sheet Metal Work
15:11 - Starting Over... on a New Piece
16:43 - Rear Cover: Complete
17:12 - Outro
3 سال پیش
در تاریخ 1400/01/31 منتشر شده
است.
38,154
بـار بازدید شده