Boring Head Tips (Part 2 of 2) - Tormach CNC

Tormach machinist Mike Corliss demonstrates the basic setup procedure to true up the outer diameter of a part with a CNC mill. At 1:30 he demonstrates how to flip the cutter and points out the spindle should be rotating in a counter-clockwise direction.

Part 1 of this video series demonstrates how to use a Boring Head to bore out the inner diameter of a hole. http://goo.gl/lT97V

Be sure to subscribe for updates on everything Tormach: https://goo.gl/sWeCs7

If you want technical support, please follow these instructions to open a Support Ticket: https://tormach.com/how-to-submit-a-s...

Join the Tormach Community Forums here: https://forums.tormach.com/?utm_sourc...

There are several ways to contact Tormach Technical Support.

Tormach Technical Support Page: https://tormach.com/support?utm_sourc...

Tormach Technical Support Contact: https://tormach.atlassian.net/service...

About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:

Visit our website: https://tormach.com/?utm_source=youtu...

• #science_technology
• #boring_head
• #boring
• #head
• #tormach
• #cnc
• #mill
• #machine
• #machining
• #boring_heads
• #boring_head_tips
• #tips
• #demo
• #demonstration
• #tormachvidid
• #pn30248
• #pn30249