Brakes Pull to the Left Mystery K2500 6.5 Turbo Diesel???
24.6 هزار بار بازدید -
5 سال پیش
-
New Brakes Mystery!!! Pulls to
New Brakes Mystery!!! Pulls to the left when applied??????
I started out with a leaking seal on my 96 GMC 6.5ltr Diesel Suburban in the Anti-lock brake system. After replacing the seal I went to bleed the front brakes and snapped off the bleeders. Tried drilling and an easy out with no luck. Ended up buying new calipers. After installing the calipers, I re-bleed the system. When driving and applying brakes there is a big pull to the left. I assumed there was still air in the system so I bleed the brakes numerous times and it still pulled left.
The next logical step was a clogged or faulty brake hose. I replaced the hoses, bleed brakes again and there is still a pull to the left. I still figured theirs gotta be air in the line so I continued to bleed the brakes with no luck. Thus far have bleed 2+quarts and no go!!!
Brake parts I have changed: Pads, rotors, calipers and lines.(no hard lines)
Other info: New tires, hubs, rebuilt hydro-boost
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Support Section⤵
Become a Patreon Supporter! Check me out at 🔗http://patreon.com/user?u=3675924
Top Supporting Patreons:
🔗Leslie R. Isgrigg - Diy Powerwaller!!!
🔗Andrew Rotariu - Diy Powerwaller!!!
🔗Stephen Dunn - Diy Powerwaller!!!
Exclusive Patreon Supporters: Marcin Chojnowski, Marty Reiss, Joe Gladle
Newest Patreons - Neil Langholz
Top Channel Donation by:
Andy Mass @Electronic Recycling (Best Dude EVER)
If you like the channel and videos and want to donate, support me on Patreon, feature a product or help out with a project, you can. Send me message, a package or donate with the Links below :) Thanks to all Awesome people who have donated and Support My YouTube Ch!!!
Donations will be used towards the diy projects and better equipment to produce better videos right here on YouTube in videos to come!!!
Paypal 🔗http://paypal.me/YourAveRageJoe
Patreon 🔗http://patreon.com/user?u=3675924
ETH 🔗0x10E0AC75f9F053f146D6d003678F1c9BA1893dCb
Follow me on⤵
InstaGram 🔗Instagram: average.joe00
Average Joe Shirts on Amazon!!!
🔗AveRage Joe T-shirt's in Mens, Womens and Kid Sizes $19.99!!! https://www.amazon.com/dp/B07CRVZZ77
Want to send stuff and things?
Send to:⤵
AveRage Joe
PO Box 31562
Omaha, NE 68131
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Affiliate Links⤵
Buying from an Affiliate Link is also another Great way to Support the Channel. It doesnt cost you anything but gives me a little kickback!
Links to Amazon and Ebay for some of the products I have purchased and use.
🔗Amazon http://amzn.to/2wKdndG
🔗EBay https://goo.gl/e3m5EH
🔗Battery Supplies https://goo.gl/Rc3Zbq
🔗Opus BT-C3100 Battery Charger https://goo.gl/EqhPAC
🔗MPPT PCM60x Charge Controller https://goo.gl/vq3z9r
🔗Tp4056s I get are here http://amzn.to/2j5cg0d
🔗Heat Shrink I use is here https://goo.gl/vjXcfM
🔗Best Solder Ive Used https://goo.gl/JDWEZb
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Music Provided by⤵
🔗Epidemicsound.com
I started out with a leaking seal on my 96 GMC 6.5ltr Diesel Suburban in the Anti-lock brake system. After replacing the seal I went to bleed the front brakes and snapped off the bleeders. Tried drilling and an easy out with no luck. Ended up buying new calipers. After installing the calipers, I re-bleed the system. When driving and applying brakes there is a big pull to the left. I assumed there was still air in the system so I bleed the brakes numerous times and it still pulled left.
The next logical step was a clogged or faulty brake hose. I replaced the hoses, bleed brakes again and there is still a pull to the left. I still figured theirs gotta be air in the line so I continued to bleed the brakes with no luck. Thus far have bleed 2+quarts and no go!!!
Brake parts I have changed: Pads, rotors, calipers and lines.(no hard lines)
Other info: New tires, hubs, rebuilt hydro-boost
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Support Section⤵
Become a Patreon Supporter! Check me out at 🔗http://patreon.com/user?u=3675924
Top Supporting Patreons:
🔗Leslie R. Isgrigg - Diy Powerwaller!!!
🔗Andrew Rotariu - Diy Powerwaller!!!
🔗Stephen Dunn - Diy Powerwaller!!!
Exclusive Patreon Supporters: Marcin Chojnowski, Marty Reiss, Joe Gladle
Newest Patreons - Neil Langholz
Top Channel Donation by:
Andy Mass @Electronic Recycling (Best Dude EVER)
If you like the channel and videos and want to donate, support me on Patreon, feature a product or help out with a project, you can. Send me message, a package or donate with the Links below :) Thanks to all Awesome people who have donated and Support My YouTube Ch!!!
Donations will be used towards the diy projects and better equipment to produce better videos right here on YouTube in videos to come!!!
Paypal 🔗http://paypal.me/YourAveRageJoe
Patreon 🔗http://patreon.com/user?u=3675924
ETH 🔗0x10E0AC75f9F053f146D6d003678F1c9BA1893dCb
Follow me on⤵
InstaGram 🔗Instagram: average.joe00
Average Joe Shirts on Amazon!!!
🔗AveRage Joe T-shirt's in Mens, Womens and Kid Sizes $19.99!!! https://www.amazon.com/dp/B07CRVZZ77
Want to send stuff and things?
Send to:⤵
AveRage Joe
PO Box 31562
Omaha, NE 68131
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Affiliate Links⤵
Buying from an Affiliate Link is also another Great way to Support the Channel. It doesnt cost you anything but gives me a little kickback!
Links to Amazon and Ebay for some of the products I have purchased and use.
🔗Amazon http://amzn.to/2wKdndG
🔗EBay https://goo.gl/e3m5EH
🔗Battery Supplies https://goo.gl/Rc3Zbq
🔗Opus BT-C3100 Battery Charger https://goo.gl/EqhPAC
🔗MPPT PCM60x Charge Controller https://goo.gl/vq3z9r
🔗Tp4056s I get are here http://amzn.to/2j5cg0d
🔗Heat Shrink I use is here https://goo.gl/vjXcfM
🔗Best Solder Ive Used https://goo.gl/JDWEZb
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Music Provided by⤵
🔗Epidemicsound.com
5 سال پیش
در تاریخ 1398/09/04 منتشر شده
است.
24,679
بـار بازدید شده