Rebar Splice Length Design Example | Part 7| #learnengineering

Kestävä
Kestävä
6.5 هزار بار بازدید - پارسال - This structural engineering example will
This structural engineering example will teach you EVERYTHING about concrete cantilever retaining wall structures and the development  and lapping of concrete reinforcing! Part 7 goes over development length and lap length of concrete reinforcing per the ACI 318-14 American Institute of Concrete.

This is the best channel for structural engineering basics!

SUBSCRIBE TO KESTÄVÄ’S YOUTUBE CHANNEL! 👇
@kestava_engineering

HELP SUPPORT THE CHANNEL - JOIN THE PORUKKA GANG! 👇
@kestava_engineering

School of PE Affiliate Link for those Wanting More Material!👇
https://www.schoolofpe.com/?ref=richa...

For business inquiries email: [email protected]

Connect with me on LinkedIn 👇
LinkedIn: richard-racz-pe-620b1792

If you Want to Tip Through Brave Browser  - I'm a Verified Creator! 👇
(I am not affiliated or receive compensation from Brave)
.
.
.
.
.
.
.
.
.

Disclaimers: Richard Racz, P.E. does not hold the title "structural engineer". Any claim of it in the videos or descriptions is unintentional and is superseded by the title "civil engineer" in the states of MA and OR.

The Kestävä YouTube page is intended for informational purposes only. Nothing contained in, or provided through, this YouTube page is intended to constitute advice, or to serve as a substitute for the advice of an engineering professional. Any reliance you place on such information is strictly at your own risk.

Under no circumstances will Kestävä be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this YouTube page.

#civilengineering  #structuralengineering #kestava
پارسال در تاریخ 1401/11/29 منتشر شده است.
6,538 بـار بازدید شده
... بیشتر