Fortin Evo T Harness All in One Remote Start programming and set up

Lessco Electronics
Lessco Electronics
69.2 هزار بار بازدید - 11 سال پیش - I go over feature programming
I go over feature programming and basics of using the fortin flashlink-2 with an evo-fort1. Get one today at www.lesscosales.com

Overview


Universal All-In-One Data Bypass and Interface Module.


The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and doorlock interface combo module. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.


Product Features
•3x on-board LEDs for simplified programming and diagnostics.
•1x preloaded firmware for maximum compatibility. [1]
•4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.[2]
•20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
•Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.

Communication Ports •3x CAN-Bus controllers.
•3x General purpose controllers (J1850, Class 2, encrypted key etc.).
•2x On-board Relays (SPDT).
•1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
•1x TB control port for TB-series modules. [3]

Parts Included •1x EVO-ALL control module (firmware preloaded). [4]
•1x 44-page Installation and programming guide. [4]
•1x 20-pin General purpose harness [5].
•1x 4-pin Fortin 2-way data-link harness. [2]
•1x 5-pin CAN-Bus harness.
•1x 6-pin Relay harness. [5]
11 سال پیش در تاریخ 1392/10/02 منتشر شده است.
69,233 بـار بازدید شده
... بیشتر