LightBurn, Print and Cut feature
4.8 هزار بار بازدید -
پارسال
-
Help page for the Print
Help page for the Print and Cut feature on the LightBurn site: https://docs.lightburnsoftware.com/Pr...
Helpful video I liked: Cutting a single project larger your ...
I wanted to review the Print and Cut feature within LightBurn. This is a handy thing if you are burning something that is larger than your machine's working area. Depending on your machine, you could either move the machine or move the material. In my case, I am going to move the material for demonstration purposes. I had hopped to use my AtomStack P7 for this demonstration as it only has 200mm square working area.
Because I was unable to remove the protective filter, I wasn't able to see where the laser dot was going to be and I need to see that for this to work. I ended up using the Genmitsu LC-50 Plus as it has a flip up filter that allowed us to easily see the laser dot.
Helpful video I liked: Cutting a single project larger your ...
I wanted to review the Print and Cut feature within LightBurn. This is a handy thing if you are burning something that is larger than your machine's working area. Depending on your machine, you could either move the machine or move the material. In my case, I am going to move the material for demonstration purposes. I had hopped to use my AtomStack P7 for this demonstration as it only has 200mm square working area.
Because I was unable to remove the protective filter, I wasn't able to see where the laser dot was going to be and I need to see that for this to work. I ended up using the Genmitsu LC-50 Plus as it has a flip up filter that allowed us to easily see the laser dot.
پارسال
در تاریخ 1402/02/11 منتشر شده
است.
4,890
بـار بازدید شده